Quoted from Treelk:Thanks everyone for your continued help. To LTG's advice, I'll keep the thread contained here to preserve how the situation is evolving (excuse my etiquette - I'm new around here).
I ran a test on all switches. Most things appear to be firing properly. However this is a summary of what I've found, and the errors I've encountered:
- The magnet test returns a power error when the right gate opens. The opto doesn't seem to register when the ball is within the right gate.
- The opto coffin pop does not open/close if I attempt to trigger it. I believe this is the source of my woes. If I run a game, the solenoid for the coffin pop will fire over and over and over. Lots of free points, at least!
Am I right to suggest I should replace these optos? Should I check a fuse? Considering all I did was replace the flippers, I'm thinking it's more likely I just pinched something somewhere... But I'm not seeing anything visually troubling.
Some time back I had an issue with the long opto on my BSD. The following thread details my journey and while it is different from yours it may provide some insight for you with your current issues.
https://pinside.com/pinball/forum/topic/bsd-won-t-load-mist-ball-at-start-of-game#post-5927820
Gord