My mist multiball is not working. I am trying to figure out the issue. But want to know how the shielded cable on the left side opto (receiver) is supposed to be wired. Mine looks like someone has soldered it previously.
Does the shielded wire bare wire connect with the black wire?
I figured I'd start there before going any further into diagnosing it. I've already replaced the L1 and the mpsa77 and all 3 1n4004 diodes on the "24 opto board" because it was sloppily worked on by a previous owner.
Also does anyone have the aftermarket 24 opto board? I can't find it anywhere.