This should help, starting at "GI Bulbs Not Lighting". http://www.pinwiki.com/wiki/index.php?title=Williams_WPC#General_Illumination_Problems
I would say check the J120 and J121 connections in the backbox.
You're currently viewing posts by Pinsider kevinleedrum.
Click here to go back to viewing the entire thread.
This should help, starting at "GI Bulbs Not Lighting". http://www.pinwiki.com/wiki/index.php?title=Williams_WPC#General_Illumination_Problems
I would say check the J120 and J121 connections in the backbox.
Do you have 18V at TP8 (a test point) on the power driver board? This eventually makes its way to J138 on the CPU board, so that might help narrow it down further.
Are you getting 12V at TP3 (or, alternatively, does LED1 light up)? That 12V is regulated down from the same 18V source as TP8. If you don't have regulated 12V either, then check your J101 connection. If J101 seems fine, there may be a problem at BR1, C6, or C7, but you should consult with someone more knowledgeable than me at that point.
http://www.pinwiki.com/wiki/index.php?title=File:WPC_Power_Summary.jpg
You're currently viewing posts by Pinsider kevinleedrum.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/bsd-dracula-playfield-lighting?tu=kevinleedrum and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.