(Topic ID: 137654)

BSD Coffin Mod in the works..


By pinball_customs

4 years ago



Topic Stats

  • 597 posts
  • 120 Pinsiders participating
  • Latest reply 6 months ago by pinball_customs
  • Topic is favorited by 48 Pinsiders

You

Linked Games

Topic Gallery

There have been 123 images uploaded to this topic. (View topic image gallery).

P_20180509_103242_vHDR_Auto (resized).jpg
P_20180516_092046_vHDR_Auto (resized).jpg
1865B0A8-039E-492B-8504-7C08D796F894 (resized).jpeg
05E7EC15-9D3F-46E9-AB66-E74065445005 (resized).jpeg
2C3DD5E2-089B-481A-B18A-0AC742F83D61 (resized).jpeg
1F93E6F2-ABC1-4A4C-8BF5-B4105CB1F8D8 (resized).jpeg
043B162E-2ACA-4E99-88C8-34402B25D527 (resized).jpeg
A45D30B6-F524-4321-9E4F-549D89182107 (resized).jpeg
2712DCC8-5344-4B51-A977-FBA4161225F2 (resized).jpeg
99577610-C313-4107-9844-BB8DA4D781C0 (resized).jpeg
IMG_6488 (resized).JPG
Screenshot_20180306-062723 (resized).png
image (resized).jpeg
image (resized).jpeg
image (resized).jpeg
image (resized).jpeg

You're currently viewing posts by Pinsider msj2222.
Click here to go back to viewing the entire thread.

#67 4 years ago

put me down for one...This is a must

1 week later
#184 4 years ago
Quoted from pinball_customs:

Yes, but I'll be sure to give early adopters of this crazy mod a fair deal

2 weeks later
#218 4 years ago

any price on the torches yet?

1 month later
#275 3 years ago
Quoted from pinball_customs:

Thanks fellas. I just finished another batch and am shipping tomorrow.
I apologize if Im sporadic with replies, I'm actually rarely online lately.. I'm trying to get caught up on the backlog here (of all parts, not just BSD) while watching my two toddlers lol. One more batch after this one and I'm actually fully caught up on BSD mods.

Just wondering if you could take a few minutes to post who's is getting shipped. I paid Sept. 7 and haven't received mine yet. I have been trying to be patient but this seems like a long wait but of coarse I don't know when others sent payment.

#279 3 years ago
Quoted from pinball_customs:

Yours is shipping tomorrow, Michael.

Quoted from pinball_customs:

Ok, the following are shipping tomorrow:
Eric E.
Steve P.
Michael J.
Troy K.
James M.
Sam
The remainder will be shipping no later than the end of next week, and that frees up production on the BSD mods
Now... I'm holding a Black Friday sale on these until Monday, only $200 USD shipped!
Those of you who ordered some time ago and still haven't received yours yet, I'm going to extend this offer to you retroactively and will refund you $20 after I've shipped your mod.
Thank you all for your patience

Thanks for the update and the Black Friday refund.

1 week later
#292 3 years ago
Quoted from pinball_customs:

Aaand I have another. Forgot I had this. It's an early pull, when I was trying a two-toned approach to help with light bleed. The eyes don't light up on this one. There's also an air bubble in the chin, but I'll repair that befor shipping.
Mcclad has first dibs
$60 usd shipped

20151206_214058.jpg 20151206_214117.jpg

That is still better than the original!

4 weeks later
#311 3 years ago

For those who are interested, it bugged me that for install you removed the light board. The Mod was only lit by the flashers and even then not very much although I put in the brightest flashers I could find. I decided to run two lcd strips http://www.cometpinball.com/6-3-V-Plug-Play-Strips-Comet-Pinball-p/6.3vsmdstrips.htm , down each side of the coffin, tied them together and wired to one of the lamp board connections. I used red strips but ww might be a better choice as its cast in red resin. I also used the longer 7 led strips which were a little long to illuminate just the broken open end of the coffin and Drac...I think the 3 led strips would be perfect. They also sell a dimming unithttp://www.cometpinball.com/product-p/mtxbriteadj.htm for cheap $ that will give you more control over the look. You may also want to try and not tie the strips together and wire each to a different spot in the connector. Overall I think its much better to showcase the mod and illuminates/interactive in the modes during gameplay. Just wanted to throw this out for the DIYers. Let me know if you have better or different results, I have limited time to experiment but am always looking for improvements.

20160106_092434_(resized).jpg

20160106_092337_(resized).jpg

#314 3 years ago
Quoted from jeffspinballpalace:

Looks great msj2222, I was planning to do the same. Will post if any different results. You have a pic of connection point?

Next time I open it up I can take one. Basically the lamp board under drac are connected under the playfield to a square 4 pin connector. I connected the strips to the yellow wired pin and the one diagonally across. I got a bit of ghosting on one of the lane inserts and the left skill shot light when I used either of the others. Hope this helps...have fun

2 years later
#571 1 year ago
Quoted from j_m_:

it's been 5 months later since "mr. let's get this hammered out" has even replied to this thread (and another month since he claimed he wanted to work this out
this is why you don't make promises that you can keep. and more importantly, you don't take money for things you can't deliver on

This is totally unacceptable! Lets try to keep this current until it gets resolved.

#578 1 year ago
Quoted from RudeDogg1:

I was actually trying to help the guys out on here that have been waiting for years for torches. If I had posted a fresh thread it would of just got lost in all the other petty bitching and moaning that has become pinside these days so wouldn't of been a help to no one!

Maybe a good solution is you should start a separate thread and then simple post a link to it on this thread for the interested parties. There are people trying to get issues resolved from this seller and your mod posts are derailing that.

1 month later
#585 1 year ago
Quoted from pinball_customs:

JM, I've offered several times to refund your money for the torches.
I've been dealing with some pretty serious stuff at home so I apologize that mod making has not been a top priority. I do appreciate everyone's patience with me.
I just finished a batch of coffins, all pre-orders are shipping today. I have a limited number (4) for purchase that are ready to ship for $180 USD. I also have one pre-printed dud that is 1/4" too short (see pic). It will still fit and work fine in the game. $100 shipped.

This doesn't make sense , are you saying he has refused your refund?

Promoted items from the Pinside Marketplace
$ 14.99
Electronics
PinballElectronics.com
$ 135.00
Lighting - Led
LED OCD
From: $ 233.10
4,000
Machine - For Sale
Advance, NC
Wanted
Machine - Wanted
Upper Freehold, NJ
$ 259.95
Lighting - Led
Pin Stadium Pinball LEDs
€ 95.00
Lighting - Led
FlipperLED
3,900
Machine - For Sale
Madison, AL
$ 5.00
$ 999.00
Flipper Parts
Mircoplayfields
3,900
Machine - For Sale
Buckner, MO
$ 28.00
From: $ 11.95
Playfield - Toys/Add-ons
ULEKstore
$ 128.00
Playfield - Other
ModFather Pinball Mods
From: $ 20.00
Cabinet - Other
Rock Custom Pinball
$ 399.95
Lighting - Led
Pin Stadium Pinball LEDs
From: $ 16.95
From: $ 18.00
Apparel - Men
Pinside Shop
From: $ 29.00
Boards
KAHR.US Circuits
From: $ 40.00
Cabinet - Other
Rock Custom Pinball
$ 14.95
$ 99.00
Gameroom - Decorations
Pinball Sales
$ 209.99
$ 14.00
Electronics
Yorktown Parts and Equip
Great pinball charity
Pinball Edu

You're currently viewing posts by Pinsider msj2222.
Click here to go back to viewing the entire thread.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside