I will get ahold of you next week , I don't think I can look at my pin now that I've seen this !
Flash sale until tomorrow at midnight
$180 usd shipped for painted
$100 usd shipped for unpainted (prepped and ready to go)
Quoted from pinball_customs:Flash sale until tomorrow at midnight
$180 usd shipped for painted
$100 usd shipped for unpainted (prepped and ready to go)
Grrrrrr...
Quoted from dmbjunky:Grrrrrr...
No worries bud, you already said you'd send $$$ this coming week so I have no problem honoring this price for ya
Quoted from pinball_customs:No worries bud, you already said you'd send $$$ this coming week so I have no problem honoring this price for ya
You don't have to do that but thanks. I was just venting a little.
What's the torch mod?
What's the cost on the torch mod?
Just picked up your coffin mod...second-hand.
Very nicely done.
It's a big improvement over "Ron Jeremy"....
Quoted from indypinhead:Just picked up your coffin mod...second-hand.
So you're the one....
Sent the deposit. I might be interested in the torch mod too. So it might be best to wait to ship mine.
I posted this on the general BSD owner's thread - thought I'd try here as well.
I recently purchased the Dracula coffin mod and I'm now just getting around to installing it. Question to those who have already done so: is this supposed to fit over the existing light board (see the 1st pic below)?
IMG_1229_use1_(resized).JPG
With the light board on, mine does not fit completely (see pic #2).
IMG_1232_use2_(resized).JPG
If you look at pic #3, you can (hopefully) see that the opposite side is not flush and has a slight protrusion in the middle. Wanting to know if an additional step needs to be done with the light board, or if I received a defective unit.
IMG_1239_use3_(resized).JPG
If anyone has any insight, it would be much appreciated! Thanks!
Ok, so combing through the thread I found the post saying that you need to remove the light board completely - was not aware of that.
Got it installed - awesome mod!
Yup, that's correct.
I believe someone else added the additional lighting back with some LED strips. I welcome anyone to sell a supplement to this mod that adds back the additional lighting! I found the lighting from the flashers was enough but to each their own!
Also, update on the torches coming soon.. Sorry for the delay on these, the new baby kinda threw a wrench into my schedule this month lol
I plugged in the original light board below the playfield and plugged some long lead LEDs into the sockets to run up into the coffin. The material on the new coffin is pretty thick so not a lot of light gets through even with white LEDs.
http://www.cometpinball.com/6-3-V-Plug-Play-Strips-Comet-Pinball-p/6.3vsmdstrips.htm
Quoted from pinball_customs:Also, update on the torches coming soon..
Quoted from DoubleDanger:I'm finally getting around to installing mine, since I picked up a BSD last Thursday. I got the light board out and everything, but how did you guys manage to reconnect the lock lights? I don't have anywhere near enough room to screw the bracket back on to the posts.
From what I've heard, people are using double sided tape
Quoted from indypinhead:From what I've heard, people are using double sided tape
Velcro is a better option.
For those still waiting on their coffin orders, the remainder has been completed and will ship this week. I do apologize... With the latest news on my brother, we're obviously a little behind.
Thanks
no worries, take your time. and again, sorry for your loss. I can't even begin to imagine what your family has been going through
As for torches, I do understand the frustration of waiting so long... I can process refunds for now if you prefer, but I do assure you they're coming -- the last 2 months has put me extremely behind on many projects.. but I see light at the end of the tunnel!
Quoted from pinball_customs:Hey all, I'm at work but here's a shipping update: I'm shipping these bad boys out tomorrow
I think that's mine in the middle
thanks for the update brock!
Quoted from Damon:Been waiting over 2 months for mine so i really hope one of those is mine...
yep, I'm right there along with you. I paid back in march
brock,
can I get an update on where I'm at on the waiting list?
was mine among those that were going to be shipped out last week or am I further down the list (and if I'm further down, how many people are still ahead of me?
Received mine awhile back and the mod is amazing. The only problems were what you're dealing with now is exactly what I was dealing with back then. Lack of communication and no time frame given. Very frustrating to have to wait and wait and wait. Hang in there guys.
so... I'm guessing that mine was not among those 5 shown in the image 11 days ago (either that, or nothing has shipped yet). I would have thought to have either received it by now (since he's in ontario and I'm in michigan) or at least some form of tracking info.
brock hasn't been here on pinside since june 25th (2 days after posting that photo of the batch that would have shipped on the 24th or 25th, according to his last post)
edit:
received my coffin mod today. torches must still be in the works as they were not in the box
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/bsd-coffin-mod-in-the-works/page/8?hl=ozpinhead and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.