You're currently viewing posts by Pinsider northvibe.
Click here to go back to viewing the entire thread.
Quoted from zacaj:What dremel tool would you recommend here? I've tried this with a few different ones and never had good results
I would assume the “brown” sandpaper looking cut off wheel? Just hard not to cut a little of the pf with that big of a wheel and the screw being flush
Quoted from Black_Knight:Especially on a playfield. If the screws are flush with the PF, the disks are too wide and it will hit the wood before getting a deep enough grove in the screw.
Always use the right tools, a dremel is not it in this case.
Watch this:
Fortunately I don’t think I’ve had a flush screw, but yes I totally recommend having this kit on hand. I’ve used it on cars many a time
You're currently viewing posts by Pinsider northvibe.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/broken-wood-screw-in-playfield?tu=northvibe and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
