replace the guide with a doner... I have #2 nut and bolt hardware I use over trying to re-revet the guide inplace.

replace the piece, not that hard...especially using nut and bolt hardware. I'd even mail you a set of three for the job as well as the tabbed guide

And you'll have a private message "PM" from me too.

Here's my kit, took me 1 minute to drill out the guide. 1 guide, and qty 4 nut/washer/bolt pieces (in case you loose one)

(A perfectionist would use a drop of blue locktite on the screw threads)

Ken

20180313_110528_resized (resized).jpg

I dont beleive so (you could ask Steve thou..), I just troll ebay and pick up a surplus cage every once in a while.

Here's one now for $25 etc

ebay.com link: 66502

My freebie guide says B-10808, so there! (you can see it in the above pic)

my email... kheadache at gmail.com