Attack from Mars
Bally, 1995
Avengers: Infinity Quest (Limited Edition)
Stern, 2020
Black Knight
Williams, 1980
Creature from the Black Lagoon
Bally, 1992
Deadpool (Limited Edition)
Stern, 2018
Demolition Man
Williams, 1994
Dungeons & Dragons
Bally, 1987
Egg Head
Gottlieb, 1961Quoted from brobra:Next adventure, Minneapolis to Kenosha area. Headed down from 8a to 2pm, headed back up from roughly 3p to 9pm.
Wpc stuff turns me on. Hit me up.
If you have something I want at a "can't pass it up" price I might buy, and you would be selling it within hours of procuring it. 90's WPC. Have anything?
Quoted from daakrolb:If you have something I want at a "can't pass it up" price I might buy, and you would be selling it within hours of procuring it. 90's WPC. Have anything?
A I’ll have some stuff on deck and will post the listing here. Hopefully another WD. Still hucking LOTRs
my favorite game, and my bread and butter
I don’t know though, when I want to stop shorting and relax, nothing beats the nice pacing and pause of a nice WD.
9C5D74A3-0C24-44D1-9560-6669B960E429 (resized).jpegA85FE57F-2CF4-4503-960A-D05D4DF362EE (resized).jpegQuoted from brobra:Coming home
[quoted image]
I love 1st Wave.
Quoted from fanuminski:do you have the combo for it? it's like Al Copone's mystery treasure...
I still have no idea what it weighs. I’m thinking 800lbs at least. It’s a very cool piece.
Quoted from brobra:Any local roadies need utility cases?[quoted image][quoted image][quoted image][quoted image]
Might save the big red one and travel around with an EM
So pinside should get geared up to focus on video games and other collectibles. KLOV is cool, but the pinside system and architecture is way superior, imo.
Get ready for CRAPS dice action on TWITCH, tomorrow around 230p central.
I’ll be rolling for 7s off the line and hopefully avoiding 7s after the point.
[PinballOutpost]
https://m.twitch.tv/pinballoutpost/profile
44C0B5BF-F41E-48FE-BB28-FE1B391F9296 (resized).jpeg76BC0D0F-24C6-4F47-A55A-DCD9333A7160 (resized).jpegQuoted from EJS:Mike snapped a picture of Dave the other night. Dice are mid air. [quoted image]
Nice shot!
Would love to see a few with a high speed shutter stopping the dice cold mid-air.
Quoted from brobra:Nice shot!
Would love to see a few with a high speed shutter stopping the dice cold mid-air.
My next thought is to eventually get two cameras mounted on the ceiling via the light fixtures for a more permanent solution if we are planning to stream a few weekends a month. That way it would resemble a table like you see computerized/ virtually and then have one or two more cameras pointed at the players/dice. In theory we could then shoot both directions and have up to 6 people playing at some point. Will need a second dealer when that happens.
I think this game is kind of badass...
Tricking out games so Texas and California...
I’m a fan.
Came across this today. Very interesting and fun for those looking to up their em repair skills.
https://www.funwithpinball.com/learn/EM-pinball-online-repair-clinic
Quoted from brobra:Get ready for CRAPS dice action on TWITCH, tomorrow around 230p central.
I’ll be rolling for 7s off the line and hopefully avoiding 7s after the point.
[PinballOutpost]
https://m.twitch.tv/pinballoutpost/profile
[quoted image][quoted image]
Shout out to the Dogs Rule thread. One of my personal favorite pinside threads.
https://pinside.com/pinball/forum/topic/dogs-rule/page/73#post-6133326
Quoted from brobra:I think this game is kind of badass...
Tricking out games so Texas and California...
I’m a fan.Machine - For Sale
Fish Tales High End Restore
Featured!
Fully restored (full original status) “Another High End Restore by Dave Lucas! This machine is one of kind and perhaps the nicest FT on the planet. The has been modded to a one of kind
Masterpiece for the ultimate coll...”1 day ago
Lakewood, CA
9,000 (OBO)
dasha126
I'm speechless.
Looks like another WD is inbound. I’ll need to go through it; probably repair motors, and give it some TLC, but it appears to be fairly solid. I’m kind of pumped up about it. I’ll post pics once it’s in my lair.
I probably need to buy a set of these quality gems for a few games.
https://pinside.com/pinball/forum/topic/lenticular-apron-cards/page/3
Is he a bro or is he a bra?...no one knows
Quoted from brobra:Brobra”
(Is he a bro or is he a bra?...no one knows
I thought a Brobra was to be called a manssiere.
Quoted from brobra:I probably need to buy a set of these quality gems for a few games.
https://pinside.com/pinball/forum/topic/lenticular-apron-cards/page/3
I know the guy that makes them.... he is a total d-bag.....
Quoted from ralphwiggum:I know the guy that makes them.... he is a total d-bag.....
Oh yeah, your stuff is nice. Have to give you props.
Quoted from brobra:I probably need to buy a set of these quality gems for a few games.
https://pinside.com/pinball/forum/topic/lenticular-apron-cards/page/3
I just print out apron cards from pin side on photo paper.
Quoted from ChrisPINk25:I just print out apron cards from pin side on photo paper.
Yeah, that works too. Thanks, Chris.
Ralph’s lenticular cards are kind of sheeeet.
Quoted from Bryan_Kelly:I'm speechless.
Sometimes I strongly dislike custom colored powder coated trim, but that orange is stunning. The mirror blades, new hardware, color DMD, new dome. Straight up hard yet elegant work....”speechless” is right.
I’d buy that thing over any NIB current release all day long and on Sunday.
Quoted from brobra:Ralph’s lenticular cards are kind of sheeeet
I don't know what this means.... LOL....
Quoted from brobra:Sometimes I strongly dislike custom colored powder coated trim, but that orange is stunning. The mirror blades, new hardware, color DMD, new dome. Straight up hard yet elegant work....”speechless” is right.
I’d buy that thing over any NIB current release all day long and on Sunday.
Did you happen to zoom in on the bottom side of the playfield that could be seen in the picture showing the inside of the cabinet? It looks as though a lot of the hard work was skipped, Rusty parts, and corrosion. If a complete restoration was done the bottom side of playfield should look great as well. I hate to critique some one else's work but for the asking price I would expect a full teardown of both top and bottom side of the playfield and rusty parts should have been tumbled or replaced.
Quoted from trilogybeer:Did you happen to zoom in on the bottom side of the playfield that could be seen in the picture showing the inside of the cabinet? It looks as though a lot of the hard work was skipped, Rusty parts, and corrosion. If a complete restoration was done the bottom side of playfield should look great as well. I hate to critique some one else's work but for the asking price I would expect a full teardown of both top and bottom side of the playfield and rusty parts should have been tumbled or replaced.
Wow, didn’t notice that until you pointed it out. I just assumed based on the description and bling-ness of the whole deal. Yes, for that price and what has been done, that should be addressed for sure.
Quoted from ralphwiggum:I don't know what this means.... LOL....
Me neither, lol. Meant to say they’re awesome
Quoted from brobra:[quoted image][quoted image]
I miss mine, other than the damaged playfield from after the glass broke while on location.
This game is a lot easier once you can finger the right suspect based on the eye shifts.
Quoted from brobra:Sometimes I strongly dislike custom colored powder coated trim, but that orange is stunning. The mirror blades, new hardware, color DMD, new dome. Straight up hard yet elegant work....”speechless” is right.
I’d buy that thing over any NIB current release all day long and on Sunday.
If that's what you look for in a restoration, we'll have to agree to disagree on what that one has to offer.
Quoted from EJS:I miss mine, other than the damaged playfield from after the glass broke while on location.
This game is a lot easier once you can finger the right suspect based on the eye shifts.
Yeah. These are nice. The reel gears needed a good cleaning. Off to some new rubbers, naptha, wax. Left it all incandescent. The glass looks decent.
Quoted from Bryan_Kelly:If that's what you look for in a restoration, we'll have to agree to disagree on what that one has to offer.
Fair enough.
Quoted from daakrolb:Well, I'm interested in your most recent Who Dunnit machine. I may even be interested in it if it needs some work, and would buy as is, depending on the price. Just let me know. Thanks.
Sounds good. It’s all shopped out, and playing well. A good day project.
Quoted from RustyLizard:Is he a bro or is he a bra?...no one knows
I thought a Brobra was to be called a manssiere.
15E5306D-45CD-4E51-B55F-CDE2AC5C20D5 (resized).jpegQuoted from brobra:Looking good naturally lit. Did toss some comet warm clears in the reels.
[quoted image]
Incandescents rule!!
Quoted from chad:Incandescents rule!!
I genuinely have to say- they absolutely DO NOT. On one hand, I get that's the original material... but god almighty they suck.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/brobras-pinball-talk-thread/page/9?hl=brettv and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Reedsburg, WI
