(Topic ID: 284185)
Linked Games
Attack from Mars
Bally, 1995-
Avengers: Infinity Quest (Limited Edition)
Stern, 2020
-
Black Knight
Williams, 1980
-
Creature from the Black Lagoon
Bally, 1992
-
Deadpool (Limited Edition)
Stern, 2018
-
Demolition Man
Williams, 1994
-
Dungeons & Dragons
Bally, 1987
-
Egg Head
Gottlieb, 1961
There are more than 8 games linked to this topic.
Click here to show all linked games
Click here to show all linked games
Topic Gallery
Quoted from brobra:Invaluable; wouldn’t trade it for anything
Well played sir!! I would expect nothing less.
Quoted from EJS:I’m sure the state has numbers on all of us for this.
about tree-fiddy
Quoted from brobra:Chasing spins
Redbull Vodkas usually get the job done for me. 
Red Deer, AB
The Operating Room Des Moines….
0EC9D47E-6171-4DC1-BCA8-D35F805EAC7E (resized).jpeg10F713FD-203E-4674-A499-FE0F63F213E8 (resized).jpeg797692FE-DB95-4199-BE3B-AA39E593258F (resized).jpeg97F45EB0-88BF-47A8-9B85-EC06D352AAA8 (resized).jpegE00E825D-CB85-4E2A-8F82-17A9F8424D86 (resized).jpegFA11A022-E0C5-4514-93FD-F00FC8C6F8AC (resized).jpegFD96AF30-DC53-4546-8386-696B8D07281C (resized).jpeg
0EF98C1A-329D-4527-9889-183F4292A8BF (resized).jpegQuoted from cavalier88z24:You in des Moines? Watch your speed there!
Thanks bro. I always find a full back to take the flak on the road….can always use good luck…
Road rule #1…tail that stupid fucker by a 1/4 mile and watch your 6
Hopkins, MN
Quoted from brobra:Chasing spins is like chasing women but better.
[quoted image][quoted image]
Be careful. Both can injure your back if you don’t know what you’re doing.
Quoted from EJS:Be careful. Both can injure your back if you don’t know what you’re doing.
big ass adventures, lol.
9247BAD2-717A-469B-AA95-AAFA6D51F5AB (resized).jpeg
95D13D96-D708-483C-B2B7-5D1A77056D31 (resized).jpeg
Quoted from brobra:The Operating Room Des Moines….
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]
[quoted image]
Operating room. Also has this fitting image in the bathroom 
Screenshot_20210804-195745_Gallery (resized).jpgWhat’s MPLS without TILT
55E85159-5170-4371-83CB-A98B539325A1 (resized).jpeg7CC41EF0-BE60-4BD7-8D64-15BEADDCDCC2 (resized).jpegAD7E1B40-8775-4A18-843D-0A2F9513A627 (resized).jpegBBD2DE62-8273-439D-A7C5-1AB8090840CA (resized).jpeg
That’s the tightest Whirlwind around. Don’t care about the cab which is nice, the pf and mechs are fully dialed in. It’s a treat to play.
Touched base with a friend to see what he was up to.
He’s rebuilding a corvette motor. Apparently they are super complicated and over built.
Also got a play on of one of the nicer original Getaways I’ve come across.
I know it will be for sale. Tempted to pay the fair price and keep it for myself.
25CAF9C5-D11F-4BAF-B99E-06E4DAA0F348 (resized).jpeg279A5FE2-568F-4B47-A361-BA0E2B809D16 (resized).jpeg8D5B7C1E-9BE1-4BFA-BBA3-746B4E452D66 (resized).jpegC2975FE6-F0F4-4AFD-8C2F-95E65AD072DF (resized).jpeg
Quoted from Dan1733:Little pachinko board in the head is pretty cool.....
That one is for sale, shoped or unshopped I believe; but I head a rumor it might be gone.
Initial assessment of JD: decent overall.
Cab is in good shape, not split or separating. Artwork is still vibrant with minimal damage.
Playfield is good. See a touch of insert edging and one hot dog slightly lifted.
Bank set up switches all show errors. Incorrect reset coil wiring I suspect.
Need to check some Gi also, as it looks partially out.
A couple rotten dogs; power driver, and fliptronics boards.
Next steps;
Vaccum
Clean inside cab
Puddy any cab dings
Hit the mechs and electric
Lower any inserts needed
Deep clean pf.
Check and replace rubbers
Give it a Brobra light job.
2672D09A-E692-49E5-ADE8-983908E2FE10 (resized).jpeg3257331F-988B-465C-92B6-792973710E15 (resized).jpeg7739B31C-3B70-465A-9660-F234F3614D38 (resized).jpeg9BEE91EF-882C-4718-A112-701F8B493246 (resized).jpegABFDE4C0-C5A3-43D1-B547-6675B0880193 (resized).jpegCEB10D7E-7CE3-49A0-A782-E4E30AEA19EE (resized).jpegFD736CA8-E5DE-4947-9848-6DDEA0687FB8 (resized).jpeg
Gi fixed double checking wiring to J120
Reset coil for bank is setup correctly, but wired backwards. Optos for targets all register in test. Game is fully playable.
Quoted from cavalier88z24:It's got the topper!
The topper is in perfect shape
Always a bonus…
Quoted from brobra:The getaway rocks so hard!
I absolutely love my decked out HSII. Great fun and addicting pin! I think there are a lot more people looking for this pin now in nice shape.
Quoted from DB62:I absolutely love my decked out HSII. Great fun and addicting pin! I think there are a lot more people looking for this pin now in nice shape.
Yeah, I’ve noticed a trend with the late 80s and early 90s games. That nice one the picture will be a 4500 game all day long, it has a gorgeous playfield, plays perfectly, and an extremely nice original cab.
Watching that ball whip around the track with the magnets is amazing. Great mech!
Wed 8/11 Loop from Mpls to Des Moines to Souix falls to Minneapolis. Possibly could swing a mega loop SF to Fargo then back to MPLS. PM with hauling needs up or down.
Quoted from brobra:Wed 8/11 Loop from Mpls to Des Moines to Souix falls to Minneapolis. Possibly could swing a mega loop SF to Fargo then back to MPLS. PM with hauling needs up or down.
You’re adding Fargo in there? Oh man.
Quoted from Waxx:You’re adding Fargo in there? Oh man.
It would be a pretty long loop.
Quoted from Methos:Any plans to go out to Ohio in the near future?
Ohio 8/19 - 8/24, actually. Going to a wedding and going to trip with Mrs. Brobra.
Old decals coming off IJ. I don’t do decals anymore due to limited shop setup…plus to do it right is a chore.
I am more excited about this game than any other I have had in a while…
With all work going into it, I don’t think I’ll be able pass off any screaming deals…
05F1DBC0-95C7-4B6A-AF81-CF0ACFAB1B25 (resized).jpeg
Pretty happy with my revolving Bally/Williams lineup…
Finally got everything dialed in and shopped.
Had a few minor head scratchers reworking some bad wiring, and clearing out errors, but back to solid.
Need more warm or sunlight LEDs. Just dumped about $500 in comet’s across 3 games. I suppose that’s the price to get the lighting good.
I still think JD might need some auxiliary post spots to help.
I think demo man is my favorite of the bunch right now, but exploring JD and it’s growing on me for sure.
Quoted from brobra:Just dumped about $500 in comet’s across 3 games. I suppose that’s the price to get the lighting good.
Yeah Comet/ LEDs in general aren’t cheap but worth it in my opinion. I even do my EMs in warm. 2SMD for playfield GI and 1SMD for the backbox and some feature lights.
Quoted from brobra:I still think JD might need some auxiliary post spots to help.
I need to get some plays on that before it leaves I miss mine from years ago. Yeah I always thought the lighting was a bit awkward and needed a little help.
Quoted from brobra:Pretty happy with my revolving Bally/Williams lineup…
Finally got everything dialed in and shopped.
Had a few minor head scratchers reworking some bad wiring, and clearing out errors, but back to solid.
Need more warm or sunlight LEDs. Just dumped about $500 in comet’s across 3 games. I suppose that’s the price to get the lighting good.
I still think JD might need some auxiliary post spots to help.
I think demo man is my favorite of the bunch right now, but exploring JD and it’s growing on me for sure.
[quoted image]
Man, that is a mid 90's dream lineup there. Lots of great memories in HS of those movies.
Quoted from EJS:Yeah Comet/ LEDs in general aren’t cheap but worth it in my opinion. I even do my EMs in warm. 2SMD for playfield GI and 1SMD for the backbox and some feature lights.
I need to get some plays on that before it leaves I miss mine from years ago. Yeah I always thought the lighting was a bit awkward and needed a little help.
Come over. I need help on a buckaroo knocker
Quoted from gorditas:Man, that is a mid 90's dream lineup there. Lots of great memories in HS of those movies.
Yeah. It’s kind of a cool movie lineup. I’m digging it right now. I think they are all underrated and very cool builds.
JD has the Dead World mod and rom to lock ball in dead world, like the prototype its badass but the game gets confused if one drops because the trough expects less balls. I thought it was an error until I boned up on the subject….
Made a small adjustment to make Dead World reliable. Occasionally, a ball would not sit in the holder and roll out confusing the ball count in the trough. Pretty simple fix with a small rubber number inside the metal ramp that dispenses the ball.
Quoted from brobra:Made a small adjustment to make Dead World reliable. Occasionally, a ball would not sit in the holder and roll out confusing the ball count in the trough. Pretty simple fix with a small rubber number inside the metal ramp that dispenses the ball.
That is cool. I don't think I've ever played that pin. I've found it at least once in the wild, but it was OTS.
Quoted from gorditas:That is cool. I don't think I've ever played that pin. I've found it at least once in the wild, but it was OTS.
Definitely growing on me.
Plugging BERD spoke company from Hopkins mn. A 1 kg front rim with onyx hub. 1.23 for rear. Took 3 days worth of work tensioning.
Soft spokes, badass….
You want the lightest rims in the world; I got you….
462447E7-FF65-4727-856B-5FA0F81BA1A1 (resized).jpeg9BCD0B1D-1CE3-4BC5-BFD4-706397C6DFE0 (resized).jpegBD21DDFB-F1AB-4298-9C08-4D1FA9A57318 (resized).jpeg
Quoted from brobra:Plugging BERD spoke company from Hopkins mn. A 1 kg front rim with onyx hub. 1.23 for rear. Took 3 days worth of work tensioning.
Soft spokes, badass….
You want the lightest rims in the world; I got you….
[quoted image][quoted image][quoted image]
Amazing. Most people don't realize that spokes are made to be under tension, not compression. This proves it!
Quoted from fanuminski:you can use any extras for your shoe laces .. think of how light on your feet you will be!
Yeah. Air-Brobra.
Promoted items from Pinside Marketplace and Pinside Shops!
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
