Having a couple different issues with my Bride of Pinbot, but the biggest one is the display only showing the left most digits, and they aren't even complete. When I initially got the machine it had a similar issue, but I simply wiggled/reseated the connections on the display board and it resolved itself. Now doing so doesn't change the issue.
Just yesterday I replaced the AA battery holder with the No Quarters Arcade Coin Battery (it's great!), and it was after that I started having the display issue. I don't know if it's related or not. Everything else on the machine works, save for an issue where the face mechanism won't turn to reset back to the first face when it powers on for the first time.
I was reading online that one potential issue with the display could be the R48 and R49 resistors are bad, but apparently you can't test them properly because they are part of the circuit so a multimeter will show an improper reading.
Any help would be appreciated, thanks!
20220421_160553 (resized).jpg20220421_162610 (resized).jpg20220421_162617 (resized).jpg