Machine: Bride of Pinbot, The
Williams, 1991You're currently viewing posts by Pinsider mancave.
Click here to go back to viewing the entire thread.
Quoted from gypsycat:My BOP has a different problem with its left flipper it works but does not register in test mode or change lanes has'nt now for 6 and half years thought your problem might have been the same as mine
Mine's slightly different again, flipper works, registers in test mode but won't lane change on that side, been like that since i've had the machine (6 years)
Quoted from Jodannar:Will get diodes and fuses on the weekend, resolver coil and continue. Suspect bad solder join and blown diode on flipper coil.
I would think that the blown fuse is due to a bad diode on the coil. If it was a WPC driver board machine i would also test the TIP36's as a bad diode can cause a transistor to blow but i don't think the System 11's work in the same way.
You're currently viewing posts by Pinsider mancave.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/bride-of-pinbot-left-flipper-woes?tu=mancave and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Albany, NY