You're currently viewing posts by Pinsider ltg.
Click here to go back to viewing the entire thread.
Quoted from indypinhead:Lloyd,
If this is what I need to do...consider it done.
I've rarely seem an instance where you were wrong.
I'm likely wrong and can't check right now. My BS pop bumper lights don't do a light show. So I thought they were GI.
Do what calvin12 suggests and see if they come up in feature lamp tests.
LTG : )™
The lamps won't run, but they will be in the lamp test and you can see the wire colors there.
LTG : )™
I finally got at my BS.
sudsy7 is right, they aren't in lamp tests.
Mine has two black wires coming from each pop bumper. One from each pop bumper tags onto the green wire on the closest lamp to it under one of the yellow lane guides.
The other black wires disappears into the harness.
LTG : )™
Quoted from calvin12:Just because they are always in does not make then non controlled.
If they were controlled, they would appear in the lamp test when you step through it one at a time.
LTG : )™
You're currently viewing posts by Pinsider ltg.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/breakshot-pop-bumper-lighting-question?tu=ltg and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.