Just rejoined the club, picked up this early winter project. Game has good bones. Hoping someone from the group can help me with a photo of the power board with all connectors attached and the location of the purple/orange wire that goes into the connector and where the ground is attached? I don’t have a schematic as of yet. Almost forgot, game is missing translite, does anyone have one for sale or have a good scan of an original I can have made. Not interested in the alternates out there at this point.
Thank you in advance.
295CC25F-F7B1-4BA6-8AAB-CBBD1C00B676 (resized).jpeg79461170-1F46-49A5-9E31-BD8B39FC1064 (resized).jpegCAA0E06C-46F3-4A0B-B330-F3EFC8D744E1 (resized).jpegf1460b5b5cbbec5578063d0d8a33c9133d2b6e21 (resized).jpg

DF38D3AE-2247-4B5E-9ABF-0952494BBD8E (resized).jpeg

ED95CD5A-6653-490E-AA4B-8BEEC5C6F845 (resized).jpeg

Thank you IN_Pins for the detailed pictures. Game is up and running now. All that’s left is a shopout, some cabinet touchups, & pull the mylar because I can’t stand Mylar!

Try changing the starter behind the fluorescent bulb, I purchased the one in the picture at Lowe’s for a couple of dollars and that did the trick. It unscrews out of the light frame. As for the flipper issue, pull the flipper and examine the flipper shaft, it may be completely worn and the set screw no longer holds it in place.

D563E1D8-340F-4E45-B300-1D3A3506B262 (resized).jpeg

Tightening the Allen screws is your only option to attach the flipper to the flipper mechanism. Post a picture of the removed flipper for us to see. You may need a new flipper, the shaft could be indented to the point where the set screw can’t hold the shaft in the same position. Check the end of the set screw also.

How much was the show special?

Has anyone tried moving their fluorescent light from the three lower standoffs (Above the driver board) to the upper ones? I had to because the standoffs on my game are stripped. A friend of mine who also owns a Breakshot has his light mounted in the same location and he says it looks better up top and doesn’t wash out the translite.

8C5728ED-C5A5-40CD-A784-5066FE9E1485 (resized).jpeg