You're currently viewing posts by Pinsider ltg.
Click here to go back to viewing the entire thread.
Quoted from trinity9:The only thing I'm missing at this point is the ability to push "down" while in service mode. The down button won't register. I imagine I will have to have them send me a new button assembly.
Please check J602 pin 8 on the I/O board. Yellow wire/blue stripe. Be sure it is plugged in. If so then check continuity from the down button on that wire to the same color wire in J602. You might have a break along the way. Whether you can see it or not.
LTG : )
Quoted from Psw757:WORKing on a ball trough error at the moment but found this assortment of screws in the cabinet bottom scattered about.
Any look familiar?
Thumb screw for coin mech.
Ball trough error. Please open up backbox and remove metal cover over boards. Go over I/O board - long narrow one - be sure all connectors are on tight. Especially J200, J201, J202.
LTG : )
You're currently viewing posts by Pinsider ltg.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/brand-new-jjp-pirates-unpacking-trough-error?tu=ltg and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Hopkins, MN