Radford, VA
Quoted from Colsond3:I still have two 3D tombstone covers left if anybody is interested...one repro and one original.
i will take 1 about to pick mine up this weekend
(Topic ID: 29878)
Linked Games
Bram Stoker's Dracula
Williams, 1993
Topic Gallery
You're currently viewing posts by Pinsider radfordian3505.
Click here to go back to viewing the entire thread.
3 weeks later
what is the bulbs on the playfield wedge or 44/47 bc I'm trying to order right now and am not at home.i want to get blue for the slingshots and the back of playfield and maybe cool white for the rest
thats so cool you have your machines in the same lineup as me.and yes Johnny mnemonic is awesome VERY UNDERRATED
1 month later
how do i easily remove the coffin ramp.it is my last piece on my shop job and I will be ready to reassemble
does anyone know where I can get a diverter.when shopping my bsd i have completely lost it and it is the only piece im missing
alright guys ever since i finished my shop job my dracula isn't loading the mist ball like it should and sometimes when I run the test it says magnet unload error and it will work if of it loads it but the left gate isn't opening like it should during mistball and the ball will fall down the middle.please any suggestions greatly appreciated
I replaced all with leds and I ran the solenoid test and castle release coil and left gate coil isn't working but all the others are
is this a flipptronic board issue bc I read in manual that both connect on j907 on flipptronics board
I replaced all with leds and I ran the solenoid test and castle release coil and left gate coil isn't working but all the others are
is this a flipptronic board issue bc I read in manual that both connect on j907 on flipptronics board
does anyone know where I can get a diverter.when shopping my bsd i have completely lost it and it is the only piece im missing
Colsond3
NPO @chesirefilms
aobrien5
Quoted from Colsond3:The diverter behind the coffin for the long ramp / castle lock wireform? How did you lose that? I’m not sure, check Marco or PBR.
yeah and i have looked everywhere. hopefully i can find one and fix these 2 coils easily
Quoted from Colsond3:The diverter behind the coffin for the long ramp / castle lock wireform? How did you lose that? I’m not sure, check Marco or PBR.
I Have no idea how i lost it but with a lil one in the house who knows lol
Quoted from aobrien5:Never seen a diverter for sale. Look harder!
Why do you say the coils aren't working? Did you test them in coil test? LEDs can interfere with those optos, causing weird things in the magnet test. If the coils work in coil test, pull the LEDs near those locations and see if it clears things up.
yeah the 2 coils dont work in test mode
Quoted from aobrien5:Never seen a diverter for sale. Look harder!
Why do you say the coils aren't working? Did you test them in coil test? LEDs can interfere with those optos, causing weird things in the magnet test. If the coils work in coil test, pull the LEDs near those locations and see if it clears things up.
yeah figures just my luck I lose a irreplaceable part
the game plays awesome still just won't load mist and it always wants 2 balls at all times bc of it.but i absolutely adore this game. and can't wait to get it 100%. figured this is the best place for advice on this baby
Quoted from Colsond3:Illuminated lenticular apron card is hooked up now too. It’s hard to capture the 3-D effect in photos. Pretty cool though.
[quoted image]
[quoted image][quoted image]
awesome where did you get this.i must have one
1 month later
Quoted from PjM:Let me know if you have an interest in these. Recently powder coated. Did two sets used the black. Thanks
[quoted image]
how much very interested
2 years later
1 week later
4 months later
Just swapped out all blue led with cool white on the GI and man I can see so much better. I'm usually one for making the game more darker but the previous went too far with it and I bought super bright. This is by far my favorite pinball machine in my collection and think it would be the last to ever leave.
Promoted items from Pinside Marketplace and Pinside Shops!
You're currently viewing posts by Pinsider radfordian3505.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
