(Topic ID: 29878)

Bram Stokers Dracula Club....Welcome to the Carpathians


By shacklersrevenge

6 years ago



Topic Stats

  • 6,932 posts
  • 574 Pinsiders participating
  • Latest reply 14 hours ago by Micky
  • Topic is favorited by 222 Pinsiders

You

Linked Games

Topic Gallery

There have been 2,123 images uploaded to this topic. (View topic image gallery).

81187B63-C0AF-4214-BEF9-DB5726F9AAF0 (resized).jpeg
IMG_20190920_175215 (resized).jpg
IMG_20190920_174611 (resized).jpg
bsdglass3 (resized).jpg
bsdglassmirror (resized).jpg
bsdcpr (resized).jpg
20190831_104258 (resized).jpg
20190906_164519 (resized).jpg
20190803_052132 (resized).jpg
Capture (resized).JPG
20190802_194328 (resized).jpg
Capture (resized).JPG
20190803_051548 (resized).jpg
20190803_051543 (resized).jpg
20190811_180226 (resized).jpg
bsdd (resized).jpg

Topic index (key posts)

31 key posts have been marked in this topic, showing the first 20

Post #15 Coin reject image Posted by tomdotcom (6 years ago)

Post #16 Strategy Posted by tomdotcom (6 years ago)

Post #37 Easter Eggs Posted by pinster68 (6 years ago)

Post #78 Easter Egg - SUN (High Score) Posted by DeathHimself (6 years ago)

Post #124 Moon - Green Lit Insert - Diverter is Active Posted by Rum-Z (6 years ago)

Post #145 Castle Lock Ramp Adjustment Posted by Doot77 (6 years ago)

Post #158 PAPA video tutorial Posted by DeathHimself (6 years ago)

Post #266 Prototype Slingshot Plastics - Hex installed (Photos) Posted by GRB1959 (6 years ago)

Post #306 Left side Castle plastic - For Sale Posted by GRB1959 (6 years ago)

Post #378 BSD backbox LED chart Posted by MrBellMan (6 years ago)

Post #416 Plunger rebuild parts. Posted by vintage4life (6 years ago)

Post #483 Gameplay / Instruction cards Posted by tilted81 (6 years ago)

Post #563 Playfield Protector Posted by phishrace (6 years ago)

Post #677 Mystery Hole rewards Posted by Jodester (6 years ago)

Post #701 Coffin Ramp Rejecting fix - Clear plastic under headstone Posted by 27dnast (5 years ago)

Post #890 Pinball Rebel Instruction cards Posted by aobrien5 (5 years ago)

Post #958 Mounting the prototype plastics Posted by Drano (5 years ago)

Post #975 Mist Gate Troubleshooting Posted by Bryan_Kelly (5 years ago)

Post #1002 Making a Left Mist Gate? - Click the link Posted by aobrien5 (5 years ago)

Post #1065 BSD Shop Out Guide Posted by gtown (5 years ago)


Topic indices are generated from key posts and maintained by Pinside Editors. For more information, or to become an editor yourself read this post!

You're currently viewing posts by Pinsider joe2012.
Click here to go back to viewing the entire thread.

#343 6 years ago

hi,i finally got one. does anybody know where to get slingshot plastics and the up/down ramp. thanks joe

#355 6 years ago

hi tomdk, where did you get the playfield protector ,price ? thanks joe

#374 6 years ago

hi , does anyone know where to buy insert decals?

2 weeks later
#420 6 years ago

hi pinster, check the wire gate and the spring. g.l. joe

#438 6 years ago

hi guy's I was at advance auto parts and I couldn't resist. joe

#439 6 years ago

hi guy's I was at advance auto parts and I couldn't resist. joe

SAM_0806.JPG SAM_0807.JPG

#441 6 years ago

hi mr. they didn't have another set when I was there but i'm going to put them on the speaker. joe

1 week later
#454 6 years ago

hi guy's,my up/dowm ramp is so muffed up I had to add a light off the insert light.also added a red led strip behind the translight .

SAM_0849.JPG

#455 6 years ago

hi guy's,my up/dowm ramp is so muffed up I had to add a light off the insert light.also added a red led strip behind the translight .

SAM_0849.JPG SAM_0864.JPG

2 months later
#612 6 years ago

hi nor cal, are you talking about the metal tombstone behind the coffin? if so there is a screw on top that needs to be tightened. joe

#620 6 years ago

hi norcal, on mine the tombstone is behind the cross with lights not on top. are the screws for the cross tight?is the front of the coffin lose? g.l. joe

2 months later
#809 5 years ago

hi guys, anybody hear anything about new ramps and plastics ? thanks joe

#811 5 years ago

thanks psycho,the waiting is killing me. joe

1 week later
#836 5 years ago

they go on the start button. they are for the light .look at the switch there is two spade connection blades on the sides. joe

#845 5 years ago

hi aobrien5,i looked on my game those wires connect to the coin door interlock switch. joe

#860 5 years ago

hi netsepp,those are g.i. lights.change all of them the one in the center lane is bad.follow wires lamp to lamp might be a broken wire.g.l. joe

2 months later
#1188 5 years ago

hi dendoc,did you test the coil with ohms first like thor posted? if the thin wire is broken the hold won't get power.look at the thin wire give it a wiggle. compare readings with other coil. g.l. joe

#1220 5 years ago

hi nOs,if cpu looks ok go to pinwiki and look for opto problems. check all connectors in the back box and under the playfield. look at the 10opto board under the playfield make sure the connectors are ok.any loose wires? g.l.joe

#1227 5 years ago

hi nOs,look at c-2 on the driver board, is the top bulging?look where the cap touches the board do you see crusty looking stuff? can you post a pic of it? joe

#1230 5 years ago

hi nOs,i can't tell from the pic can you see anything crusty around the bottom of the cap?check tp1 tp2 tp3 also pull one end of fuses f114, f115 ,,f116 and test wich continuity. g.l. joe

#1231 5 years ago

sorry test points game on . fuses game off.

4 weeks later
#1345 5 years ago

hi blackbeard,so you finally snagged a bsd.look through this thread there are some great lighting tips. also you can do g.i. and flashers from under the playfield. have fun joe

1 week later
#1399 5 years ago

hi n0s, just put an arcade type power supply (betson p/n imp 44-1015) in the bottom of the cab.then connect it to 120v.after the games power switch so it comes on when you turn the game on. g.l.joe

#1402 5 years ago

hi blackbeard,do the g.i. from under the playfield. do the flashers too. see ya at pinfest. joe

#1404 5 years ago

no there is 3 555's under the left ramp.but you might be able to get at them if you loosen the ramp. joe

#1408 5 years ago

the service outlet is always on.it's in the silver box on the bottom of the cabinet.to the right of the coin box. joe

#1483 5 years ago

do the above first. if still no good swap flipper opto boards left side to right side and make sure both are connected.if the problem moves to the other side the problem is on that board.g.l.joe

1 week later
#1537 5 years ago

ramp make sure wires are connected,look at the lift mech,move it with your hands does it bind anywhere?solenoids did you check the fuses?. if all are o.k. I'd look in the manual for which transistors to test/change. g.l. joe

#1539 5 years ago

go to pinwiki and print out how to test transistors and how to test coils. g.l.joe also post this problem on the main forum. g.l.joe

2 weeks later
#1569 5 years ago

hi g, how much was it? I found a cheap wooden castle and painted it with gray fleck. came out o.k. I put a blue led strip in front of it . now it looks great.i still need to add some flashers. joe

#1573 5 years ago

hi g, crappy camera but you get the idea. the led strip puts a blue wash on the castle. joe

SAM_0183.JPG SAM_0184.JPG
1 week later
#1602 5 years ago

hi cpt, did you go to pinwiki? g..l.joe

#1627 5 years ago

look at manual page 3-22 wiring and schematics.the opto's you listed are on the j-1 connector. does the board have power led lit ?

#1637 5 years ago

hi nos,put the game into switch test and drop a ball in to the mystery hole#58, wiggle your finger in the left side magnet pocket,did any switches register? g.l.joe

#1652 5 years ago

hi nos, do as phishrace say's start a thread on this problem. when my game started with opto problems I pulled the 10 opto board and reflowed the headers and push each wire into the idc. connectors. I still need to replace those connectors. g.l.joe

1 month later
#1744 5 years ago

hi new pin, on my game the metal wall is on the inside of the ramp wall. your look like it's straight (inline) with the ramp.also the metal looks like it,s ontop of the ramps pivot. joe

#1748 5 years ago

hi new pin,look thru this thread I think page 22 had some shop out info. the post has a link to shop out pics you can click on to look thru. there is a pic of the posts with the playfield stripped down. p.s. always spit out the bellybutton lint. g.l.joe

1 week later
#1817 5 years ago

hi newpin, I tried markers on the red and couldn't stand it. I went and got a h.f. airbrush kit.paint and friscket.it took a looong time but it came out pretty good.let us know how yours comes out. g.l.joe

1 month later
#1903 5 years ago

I'm looking too.mine is crappy looking. g.l. joe

#1906 5 years ago

well I finally decided to fix up the coffin. I added alittle more black. came out good. joe

SAM_0330.JPG SAM_0333.JPG SAM_0352.JPG
#1910 5 years ago

hi ao, the stone paint was a little light color for me so I gave a mist coat of flat black.then I a little darker around the opening. joe

#1912 5 years ago

hi axl, I will take some better pics tonight. joe

SAM_0354.JPG
#1918 5 years ago

axl,these pics are for you. the coffin is darker than in the pic.
nos, I hope these are more to your liking. post pics of your idea with the tombstone. joe

P9100154.JPG P9100153.JPG P9100152.JPG P9100149.JPG
#1919 5 years ago

more,i can't take good pics unless it's tits

P9100148.JPG P9100147.JPG
#1921 5 years ago

OH BOY another wise ass. joe

1 week later
#1972 5 years ago

is the target rubbing against the slot in the playfield? if not remove the assembly and clean all parts,replace spring and reset plate. g.l.joe

#1975 5 years ago

marco should have the parts you need.check and see if the key is for the backbox.ha ha joe

#1978 5 years ago

if you can remove the actuator arm you can. joe

#1987 5 years ago

hi new pin , put in the search box - the pinball camera rig club. joe

2 weeks later
#2034 5 years ago

hi glarrownage, can you post some pics of the diverter and up/down ramp assemblies. thanks joe

#2039 5 years ago

thanks those pics are great.joe

5 months later
#2521 4 years ago

Hi Joe, Little Shop of Games has the center plastic. G.L. Joe

2 months later
#2669 4 years ago

Get Klein magnetic nut drivers @ pinball life. Joe

Promoted items from the Pinside Marketplace
$ 10.00
Cabinet - Sound/Speakers
Gweem's Mods
$ 135.00
Lighting - Led
LED OCD

You're currently viewing posts by Pinsider joe2012.
Click here to go back to viewing the entire thread.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside