You're currently viewing posts by Pinsider jakusu.
Click here to go back to viewing the entire thread.
Finished a few restores and now time to relax with some tweaking.
I'v been doing some custom speaker panels for my pins. Getaway, Tom, and now BSD. Tom, Cftbl TZ and Flinstones still in planning stages.
More blood was needed!
I'm going to make a custom baffle for the flashers and the lettering as well and hopefully some of the blood drips.
I want to do my own coffin idea as well...different to all the others around. Hopefully start on it soon.
Big shout out to a guy called hazzard and his pinsound mix - great job mate.
Thanks for all the ideas in this thread been great as well.
This is my second bsd because......Love never dies!!
Quoted from Jakusu:
Finished a few restores and now time to relax with some tweaking.
I'v been doing some custom speaker panels for my pins. Getaway, Tom, and now BSD. Tom, Cftbl TZ and Flinstones still in planning stages.
More blood was needed!
I'm going to make a custom baffle for the flashers and the lettering as well and hopefully some of the blood drips.
I want to do my own coffin idea as well...different to all the others around. Hopefully start on it soon.
Big shout out to a guy called hazzard and his pinsound mix - great job mate.
Thanks for all the ideas in this thread been great as well.
This is my second bsd because......Love never dies!!
Panel done. Some pics below and a little clip on first start up today. Have red flashers strips highlighting letrring in palce of the pcb.
Anyone needing a speaker panel shoot me a pm!
20180429_160320_resized (resized).jpg
Ha yes a colour dmd is a must!
The panel you need my custom one I did or you could use a standard ( but the lettering or blood wont look as good) , 12v Colour changing strip with remote allow 2m length to cut up and modify. then some basic hardware and connectors. Also I have speakers mounted off the panel upgraded to 5.25" each size.
Total cost in parts was about $150 aud not including speakers and dmd of course. Took me about 5 hours to build.
Quoted from scottmaggie:
What he said!
I reckon around 120-140 aus shipped. depending on postal service and time options etc. So about 90-100USD I guess.
Shoot me a pm if you want one. I need to get qty 5 for that pricing from my guy.
I've also done a custom Getaway and T2 chrome edition one and working on Theatre of magic design now.
Quoted from aobrien5:
Put those full size flippers on and try again.
[quoted image]
Put the glass back on reset the scores and try again !!
Quoted from Jakusu:
I reckon around 120-140 aus shipped. depending on postal service and time options etc. So about 90-100USD I guess.
Shoot me a pm if you want one. I need to get qty 5 for that pricing from my guy.
I've also done a custom Getaway and T2 chrome edition one and working on Theatre of magic design now.
Hi Guys
I have 4 people wanting one so will order the 5 today. There is 1 left for anyone else.
cheers from oz
Quoted from Jakusu:
I'll trade the last speaker panel for a tombstone cover mod if anyone is interested?
Ok the run of five custom panels is now booked up. I'll let you know if anyone pulls out.
Quoted from Jakusu:
Ok the run of five custom panels is now booked up. I'll let you know if anyone pulls out.
Hi Guys pickup and posting today. 90us delivered. One guy has pulled out so there is a spare.
Hi all. I have 2 more guys wanting the modified custom speaker panel. If there are 3 more I can go ahead so let me know. Have to order in lots of 5.
They cost 90 USD posted to the USA. Send me a pm. Thanks
Quoted from Spacemanratso09:
Thank you everyone I am so stoked
I am getting the decals from a friend who has a “quality set of decals for it”
He is doing the cab work
He recommended black but I am not doing the wire forms I like them better chrome just the trim,legs,coin door
My playfield is real nice but not perfect but that’s ok the game is for me it’s never going anywhere
Black trim looks awesome..go for it!
Hi guys. Chasing a nice plastic set if anyone has one. Tried the guy on here with new sets and he wanted 80us shipping to Australia. Would have equated to 335 aud for a plastic set....bit rough.
Any help appreciated. Also dont want a dodgy set like the getaway ones I got from Pinball Centre.....
Quoted from aobrien5:
Check PPS. As you know, shipping to AUS sucks, so good luck. I doubt Bryan was doing anything but passing the cost through to you.
Thanks yes pps is about half the cost
Thanks for that!
I blacked out my panel around the lettering on the rear of it with a black marker as well to highlight the lettering more.
I just ordered another 5 - 2 left if anyone else is in.
Love the repainted stuff...very classy.
This game def needs (deserves) better buildings and coffin etc. Even the ramp decals are cheesy.
Nothing has really grabbed me until your stuff above. Great work.
Quoted from Phat_Jay:
How long you guys figure to do a playfield swap? Never done one before but i do my own work and am mech inclined.
Hi. I haven't done bsd yet but the last dozen or so I run around 80 hours. But I polish and rebuild everything etc.
Hi all
Im getting another one of my custom speaker panel plastics done for a pinsider. If anyone else wants one pm me. They have clear dmd window, red lettering and red blood drips. Would have to be ordered and paid in the next 2 days. Lighting is up to you. I use 6v led strip to make a soft glow and 12v led strip to flash it brighter red.
20180423_112016 (resized).jpg
20180429_160320 (resized).jpg
Hi guys. Unfortunatley Aust post charges me around 40-45usd to post these so they are 95us posted. Im not doing it for profit I just would like to cover the initial graphic guys and printer costs. Happy for pickup at my place for 50usd for anyone.
Happy to put a few in one parcel if any of you guys live close to each other. I dont think the post would be too much more for that.
I did it a while ago and some people never went through that is why if you want one its prepaid and I'm just doing one group order tomorrow.
The other factor is the 2-3hr turnaround drive to pick them up which I try to work in with my other projects Im working on for my pins.
Hi all. Does anyone know if the apron on this title is identical to Getaway one at all?
Thanks in advance if anyone can help.
Hi All. I miss my drac...so I'm putting another one together with lots of special touches.
Can someone help at all with the Launch button centre of hole and cabinet pivot bolt centres please in mm measurements.
I'm converting a Getaway cab for this project.
Thank you
Kurt
Thanks Wayne I know.
Its for a mod project and I am trying to save a little bit here and there on it.. Eg I just bought a Wpc Cpu from you which was 410 and could have got it at the same time from you on ebay for 360. 50 bucks I could have used on more parts. Especially with 4 projects going at the moment.
I'm working through a really nice customized project restore of my third Dracula!
Wondering if anyone has done, or is planning to modify or change, the Village area as I really don't like it. I know you can paint them but I just hate the whole molded part entirely. Keen to see if anyone has done something custom there or not or if there is anything for sale from the mod suppliers out there. I have some ideas but nothing suitable as yet.
the metal one comes in a small pin version I ordered that too. A place called Stoneys in the UK via ebay. would look cool on thd Launch button. I dont like the text either.
Yes just carefully pop lense off.
This is just a reverse print decal on the lense.
I also novus 3'd off the launch ball text from the backing plate.
Simple cheap mod that came out nice!
Thankyou for the head graphic...and about 20 other people for putting up with me through the planning and building so far!!
Quoted from Flowst:
Joining the club next week. Where can I get some substitute “toy” mods? That Dracula in coffin looks absurd; More like a 70’s doobie brother
Likewise the castle and his manor house look a little sparse for my taste.
Quick google of mods didn’t turn up very much.
Thx
Totally agree on the village, looks cheesy as, even custom painted. I want to work on something different there. not 100% decided yet. Keen to see if anyone has done something different.
The castle looks pretty cool if you underlight it., the snow glows.
And the cheech and chong drac has to go! There are some nice alternatives around.
Hazzard - you are the man as far as BSD and pinsound go imo! Thanks for all your hard work and not charging for it.
However I would like to send another donation if you can pm me details. I know how much work goes int these mixes after doing a few myself..
Just finished my Custom MB and now onto Dracula Gothic edition - and these will slide into it beautifully....
One thing I will say the files are really large in size?
Thanks mate. Alot of time effort and money in this one. I specced exactly what I wanted to or local pf guy who did it for me. Should be done in a few weeks will do a full backstory.
Quoted from Darscot:
I think you need to detail what you mean by mist assembly, there are a lot of parts that make mist work. If your talking everything above and below the playfield my guess is it's unobtainable. If you have everything and you looking to sell you probable have a lot more luck breaking it up then try and sell the whole thing as one. I can't imagine anyone needing everything unless they are trying to add it to hobby machine or something.
I was looking for a complete new assy for my project as I am putting as much new as possible into it. I have two used ones as a fallback.
I found you can buy some parts but not the full assembly so will prob clean up and restore plus new parts unless some one has a link to the full one. Thankyou.
Thanks guys.
I made a new backboard for the new design and mounted a white round insert. So a fair bit of work.
The decal should not be an issue in colour. I guess you could drill a hole in and original backboard and just move the lamp over?
Finished my Gothic Edition..99%.
Big thankyou to Hazzard for your base sound mix, and everyone who helped with the build.
Scott, Chris, Aiden, Pinball life and Marco.
Thanks!
What do you want to know???
It may be easier to do a walk around video like I did with Monster Bash and post up on my youtube channel.
Quoted from MrCleanHead:
I decided to remove (my) crappy character plastics above the slings. The were not original because they had the white background. Early run? Prototype? Crappy remake? dont know...SO, I made some plastic protectors to give it a little "pop". I had to remove some of the washers under the nuts and I also added the red posts where one of the stand off were on each sling. I need to fine tweak these this week before I can offer them here on pinside. LMK what you guys think!
[quoted image][quoted image][quoted image]
Nice little fix. I made some rats for mine that interact with rat mode.
You're currently viewing posts by Pinsider jakusu.
Click here to go back to viewing the entire thread.
Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside