Quoted from Colsond3:Alex, where did you get the towel?
It's a custom beach towel, brother. Found a nice pic on the web and had it made... No biggie...
Quoted from Colsond3:Alex, where did you get the towel?
It's a custom beach towel, brother. Found a nice pic on the web and had it made... No biggie...
Quoted from AlexSMendes:It's a custom beach towel, brother. Found a nice pic on the web and had it made... No biggie...
On the web? Got a link?
Quoted from newtoit:I'm trying to see if the long beam opto is different from regular optos. In the schematic it is the same part No?
it is the same , i replaced it and it works perfect .
Quoted from aobrien5:For a grand!
Seriously confused how they can charge the same price as the 2 piece BK2K. Surely that playfield is more expensive to make and ship.
I would imagine licensing costs more. Honestly I'm just glad they're made. No matter the cost.
Quoted from pinball_customs:Correct. These are in stock and ready to ship. I won't be doing presales anymore, my schedule is too hectic.
I went in on one! Fingers crossed this gets here soon. I have another game on the way to keep BSD company, want to get one service call for all!
Quoted from cheshirefilms:I went in on one! Fingers crossed this gets here soon. I have another game on the way to keep BSD company, want to get one service call for all!
K tell your guy the light board has to be removed
Quoted from cheshirefilms:Hi friends- anyone have an extra of the purple under-village plastic in nice condition after swapping in new plastics- the one which has the round hole for the wire form? See attached. Mine is kind of toast- this is a pic from the internet.
Pm sent
Heads up, the Drac mods are all sold and shipping tomorrow. Sorry for the delay, we had to deal with a sudden death in the family
Hello guys!! Hope someone can help me..
I wanted to repair my rats zone, do anyone have a scan of a good condition rats insert or best a ready to print rats decal?
Thank you
Need the plastic that mounts under the left side of the coffin and covers the pop bumper mine is completely missing.
Quoted from lasermel:Installing a new set of plastics on my BSD and this one was not on the machine so I don't know where it goes. Anyone know?
Just to the left of the coffin and covers one of the pop bumpers. Mine was missing as well!
Only issue i've had is 25% of the time the plunge hits the top plastic ramp and then dribbles up the area and it messes the skill shot up. Still kinda new to the hobby, any help greatly appreciated.
Quoted from PinRush72:Only issue i've had is 25% of the time the plunge hits the top plastic ramp and then dribbles up the area and it messes the skill shot up. Still kinda new to the hobby, any help greatly appreciated.
Are you missing the clear plastic in the attached picture? (looks like it's missing in your photo). Likely the answer. Someone on Etsy sells replacements.
Quoted from Medisinyl:Are you missing the clear plastic in the attached picture? (looks like it's missing in your photo). Likely the answer. Someone on Etsy sells replacements.
https://www.etsy.com/listing/173278432/bram-stokers-dracula-pinball-clear
Quoted from PinRush72:Just got a nice Dracula a few weeks ago. PF is nice, has some cabinet fade on left side but clean, nice example.
Looks like a nice game. If you would like one of the 3-D tombstone covers, let me know. I think I have two left.
Quoted from Colsond3:Is that one of the magnet covers?
No...but it should be! It's a decal. What do ya think?
It’s hard to say… But if you want me to be honest, I think it’s a little bland and could use some more color. The red Dracula writing doesn’t seem to pop like the actual apron. And I like score and instruction cards.
Do you have a shot of the entire playfield with the decal there?
I did two versions, one black one red. Went with black but red is still as good. Now you can have red. Pm me $395 FAF0C6FA-7178-4652-8618-1BA7100854B6 (resized).jpeg5571E5BC-D12F-4175-8715-FB3CD4680C8E (resized).jpeg47B5BAFF-517C-4729-B27F-37109F4C304E (resized).jpeg058A75F0-C781-4C76-88DA-20AE327B5567 (resized).jpegincredible deal!
Quoted from Medisinyl:Are you missing the clear plastic in the attached picture? (looks like it's missing in your photo). Likely the answer. Someone on Etsy sells replacements.
Who? And do they have the replacement for the one near the coffin ramp entry too?
Quoted from pinball_customs:K tell your guy the light board has to be removed
Which flashers illuminate the mod red? Are they the ones underneath the current Drac figure? Idon't need to buy red flasher LEDs?
Quoted from cheshirefilms:Who? And do they have the replacement for the one near the coffin ramp entry too?
Yes, both come together. Link below:
Quoted from Colsond3:It’s hard to say… But if you want me to be honest, I think it’s a little bland and could use some more color. The red Dracula writing doesn’t seem to pop like the actual apron. And I like score and instruction cards.
Do you have a shot of the entire playfield with the decal there?
Here's one with some color but I don't care for this one to much.
I have black power coated armor I have to install and I'm thinking the black will blend everything together . Now about that red armor...
Quoted from mollyspub:Here's one with some color but I don't care for this one to much.
I actually like that one better.
Quoted from mollyspub:Now about that red armor...
You son of a bitch! You and Joe can leave my red armor alone. Haha.
Quoted from mollyspub:More
Here's one with some color but I don't care for this one to much.
I have black power coated armor I have to install and I'm thinking the black will blend everything together . Now about that red armor...
I like the 2nd one better too, but throw the black lock down bar in and see how it looks with that.
Quoted from aobrien5:More
I like the 2nd one better too, but throw the black lock down bar in and see how it looks with that.
The first pic actually has the black lockdown in the pic. The second one I think clashes with the pinblades.
Quoted from pinball_customs:Heads up, the Drac mods are all sold and shipping tomorrow. Sorry for the delay, we had to deal with a sudden death in the family
Sorry to hear that. Condolences. Did they actually go out as planned in your follow-up post?
Quoted from Pesmerga:Hello guys!! Hope someone can help me..
I wanted to repair my rats zone, do anyone have a scan of a good condition rats insert or best a ready to print rats decal?
Thank you
Up! No one can help me ??
That is a tough request! We can take a pic but that is not a scan nor ready to print!do not know where you can get that off the shelf.
Quoted from newtoit:Finally got BSD home! All the kinks worked out and its playing great.
Looks great! Hope those cab protectors don't ruin your nice looking decals. May want to invest in a set of metal ones.
Quoted from Colsond3:Putting some games on this...
even has proto slings; that's funny.
Quoted from neverahighscore:Nice. Is the trim color black?
Sure hope so! Wouldn't want to ruin it with red trim!
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/bram-stokers-dracula-clubmembers-only/page/106?hl=hazzard and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.