Machine: Bride of Pinbot, The
Williams, 1991You're currently viewing posts by Pinsider mightygrave.
Click here to go back to viewing the entire thread.
i installed the board with the extra cable.
But i got a strange thing... The helmet LEDs are not correctly working....
I made a Video
I changed q24 and q26 but it din't help.
Don't know what and how to check now.
Maybe you can help me and give me some input
Thank you and Best regards
Quoted from pellew:Hi,
it definitely looks like problems with the clock and data going into the board (most likely the data). Tried to swap back to the old board to see how it is working?
Are all LEDs on the board steady RED except the one next to the CPU which should be flashing about 1 time per second?
Can you tell me the number written on your board that you received, then I can look at my pictures to see if something seems odd.
All boards are fully tested before I ship them, but of course it's possible that something is a bit "loose" that might have moved during shipment. A cold solder joint for instance.
-Pelle
I will try the board swap on Thursday...
But here the pictures and the vids from the actual situation with the Board: https://sendvid.com/g7l1fvgx
Hope it helps...
I think is the cable or a conenctor on the PDB - but more infos on thursday
IMG_20190128_184323 (resized).jpgIMG_20190128_184332 (resized).jpgIMG_20190128_184628 (resized).jpgIMG_20190128_184639 (resized).jpgIMG_20190128_184644 (resized).jpgIMG_20190128_184650 (resized).jpgYou're currently viewing posts by Pinsider mightygrave.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/bop-helmet-control-for-use-with-leds?tu=mightygrave and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Albany, NY