(Topic ID: 223377)

BOP helmet control for use with LEDs

By pellew

2 years ago

Topic Stats

  • 57 posts
  • 20 Pinsiders participating
  • Latest reply 6 months ago by pellew
  • Topic is favorited by 20 Pinsiders


Linked Games

Topic Gallery

There have been 13 images uploaded to this topic. (View topic image gallery).

IMG_20190128_184650 (resized).jpg
IMG_20190128_184639 (resized).jpg
IMG_20190128_184644 (resized).jpg
IMG_20190128_184323 (resized).jpg
IMG_20190128_184332 (resized).jpg
IMG_20190128_184628 (resized).jpg
bop_helmet_control_connector (resized).jpg
bop_helmet_control_cable (resized).jpg
IMG_3605 (resized).JPG
IMG_3609 (resized).JPG
bop_helmet_control_supply_cable (resized).jpg
bop_helmet_control_fitted (resized).jpg
bop_helmet_control_pcb (resized).jpg

There are 57 posts in this topic. You are on page 2 of 2.
#51 1 year ago
Quoted from Geocab:

Nice vid of it in action. What is doing the other lighting effects on the face?

Pinduino. There's a guy here who sells a Pinduino BoP kit which is pre-programmed for this.

Quoted from Geocab:

I ordered one, now I need to get some wire and the connector. Is the one linked above correct?

I'm sorry, I don't understand, for what?

#52 1 year ago
Quoted from jsa:

Pinduino. There's a guy here who sells a Pinduino BoP kit which is pre-programmed for this.

I'm sorry, I don't understand, for what?

Oh, my mistake, that last portion was for anyone, not just you, about the connector Forecflow linked to make the wire connection to the board to get it to work properly.

I'll have to look into the Pinduino kit, looked cool.

4 weeks later
#53 1 year ago

I finally installed this board along with the wire mavantix made for me and I'm really pleased! Looks so much better with proper fade. I may have to get different LEDs, I like the idea of the retro LEDs mentioned earlier in this thread.

Thanks for making this board pellew!

3 months later
#54 1 year ago

Hi all,

I've been busy with work and haven't had time to reply to some of your PMs. I tried to reply to all unreplied messages, but if anyone has tried to contact me without receiving any answer, please sent me another PM.

FYI: I see that some of you thinks that this board is for BoP 2.0 only, but this is not the case. The board works for both original version of BoP and BoP 2.0.


2 weeks later
#55 1 year ago

I got my board, got it installed, and it looks great. I had the LED OCD board installed for the main lights, and this board makes the helmet lights work just like the ones connected to the OCD board. Perfect.


3 months later
#56 9 months ago

Hi all,

I've ordered components for a couple more boards. So if someone is still interested just send me a PM.


2 months later
#57 6 months ago

Made a few more boards today because I had some requests. Anyone else in need of one let me know.

I get little feedback from buyers. This is usually a good thing, but it would be nice to hear if someone has any more feedback.


Promoted items from the Pinside Marketplace
$ 11.00
From: $ 20.00
Cabinet - Other
Rock Custom Pinball
$ 350.00
Pinball Basement
There are 57 posts in this topic. You are on page 2 of 2.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside