So I have almost finished my refurb of BoP, but find that the left flipper is not working.

The right is just fine, but the left moves ever so slightly, but that's it.

I have a new PinLed Power board in the game the old board did the same.

I have metered the right and left flipper at the coil they give the same reading 63v on primary and secondary, so though it was coil changed to no avail!

So what else could it be?

In switch test the left flipper button registers, Ive even swapped buttons to see if the fault moved, it did not.

I'm stuck, with 63v at coil why is it not pulling the plunger in, by hand its fine.

Cheddar, you da man that was it, it looked closed but I made sure it was and now it's working.

Cheers