BOP Club...non 2.0

I'm new to pinball and will be ultra ding my EPROM from L-4 to L-6. Is the EPROM the one in the center with the blank white sticker?image.jpg

Does anyone know the exact paint color of the cabinet to match a few scuffed spots?

About every 15 games my head will go the wrong way one position, then I'll have to reset the head in the menu and it will do the same in 15 games or so. I'm currently running L-6, any ideas?

I'm getting ready to swap all the flashers over to led and was curious if they're all 89/906?

I went to play BOP this weekend and all the lights work except the ones with the green X. Any thoughts, fuse?

20170704_205825 (resized).jpg

Is the gi fuse and plug under the playfield or in the backbox? Thank you

Thank you Lyonsden!!!!!

Lyonsden, thank you for pointing me in the right direction, it wss a blown fuse. More importantlyI joined the billionaire club for the first time

I'm still having the same issue when I get to head 3 and drain, sometimes it moves correctly back to the left (2nd face) but sometimes it moves to the right and is off (4th face). This happens maybe every 20 rotations (so it works right most of the time) but then it glitches up. I just swapped out the A-13892-2 hoping this would solve the problem but I'm still having the same problem so I put the old one back in. Any other ideas? Here's the picture of the board.

20171104_161510 (resized).jpg

Thank you OzPaul!!!!!

Awesome looking

Does anyone know where you can get decals for both ramps?

I just joined the club again and I'm hoping I never leave it again. I have a quick question.....my new game releases both balls at the same time during multiball, is this normal? It seems like the last few times I've had this machine there's been a split half a second difference in the release of ball 1 to ball 2. If there's supposed to be a slight difference in release times, could anyone point me into a direction that the game would be releasing both without the small delay?

Does anyone know where you can purchase the plastic guards on the face cube? I have an old set but the guards are semi yellow on 3 of the faces and very yellow on the main face. I was hoping to swap them out but can't find the replacements.

That's what i did on my game and i have a perfect set of faces but one is yellow. I was hooping to find the guides then sell the old set

Does anyone know if there is a setting in the menu that would prohibit from restarting a game? I usually play single player games and if I'm having a really bad game I'll just hit the start button to reset it and with my bride I have to play through all three balls. The start button works at the beginning of the game but it won't reset a game

Selling a 3D translite in marketplace for $125

$200 plus shipping

I have the 4 piece face set that's in ok condition that I'm selling for $75 and I'll be placing in the marketplace.