Kalgan
I'm in,got the whole trilogy.Those inserts will clean up nicely,just pulled a mylar up on a Funhouse with raised inserts and they came up a treat. 
(Topic ID: 132740)
Linked Games
Machine: Bride of Pinbot, The
Williams, 1991
Topic Gallery
You're currently viewing posts by Pinsider king-pin.
Click here to go back to viewing the entire thread.
Quoted from MustangPaul:Well let's see them then, with 27 games your a notch above me so I'd like to see how you have then set up. You have quite a bit more room then I do.
This was my systems 11 room but as you can see it has already over-flowed.
2 months later
Quoted from Morydees:Hey guys, question for those of you familiar with mylar machines. I'd noticed some odd ball movement recently and it seems my 5 Million insert is raised on one corner. It's hard to tell from the pic but you can see the separated mylar on the lower right where it's been pulled away from the PF for some reason. A firm press didn't seem to budge it so I thought I'd ask before getting reckless with a rubber mallet and a protective cloth cushion to tap it back in.
I'm not worried about the leftover bubble so much (have plenty of those being stock mylar) but I don't want to make a bad situation worse. Thoughts?Insert_Raised_Playfield.jpg
heat with a hair dryer and push down.should just push back down easily after about 20/30 seconds.may also need to be re-glued.
3 weeks later
Promoted items from Pinside Marketplace and Pinside Shops!
Westminster, MA
You're currently viewing posts by Pinsider king-pin.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
