I did it and was very pleased with the results.
https://pinside.com/pinball/forum/topic/say-goodbye-to-old-yellowed-plastics/page/4#post-2586833
(Topic ID: 132740)
Linked Games
Machine: Bride of Pinbot, The
Williams, 1991
Topic Gallery
You're currently viewing posts by Pinsider BriPin.
Click here to go back to viewing the entire thread.
8 months later
Hi all! Is there a way to remove the head motor with the playfield only raised in the machine? I removed the cage and the two screws at the top of the motor but it looks like I have to remove the cube somehow to get to more screws. Anyone care to share some tips?
Quoted from lyonsden:those screws are on the top of the playfield and located under the shuttle ramp
Rats! I was hoping for an easier removal. Thanks for your input lyonsden!
2 years later
Quoted from janus:Sorry if this has been asked, but what does the light just above the right side of her face indicate. On my machine it's green.
I believe it's to indicate that the entrance to the mini playfield is open.
3 years later
Yeah it looks a lot better than I thought it would. Did you sand it down before application? How many coats?
Quoted from EEE:I cleaned it and applied two light coats.
I'm going to try doing mine. Thanks for the info!
6 months later
Quoted from KenM:After putting my BOP back together that worked fine previously, the skill shot coil started smoking on the first launch. No fuse blew. The coil works fine in test with no smoke. I tried it a couple times after checking connections and it keeps smoking. The 24-900 coil measured 5.7 ohms.
I'm not sure how the gameplay with switch works different than test other than that first skill shot switch is bypassed.
Any idea's where to start looking? Transistor and diode on the board?
Make sure you didn’t reinstall the coil so that the lugs are facing the playfield prop arm and shorting out against that. Ask me how I know.
1 month later
4 months later
Quoted from pencilneck:msg sent.
For anyone who wants it, here is a PDF version of the artwork I did for my coin return:
https://app.box.com/s/vk7benfh2q6brghbmk2j2gezvrmti29f
I printed it out on plain paper in a laser printer and they turned out nice.
[quoted image]
Thanks for sharing this @pencilneck! I installed them in my BOP last weekend and they look great! Thanks again!
Promoted items from Pinside Marketplace and Pinside Shops!
Memphis, TN
You're currently viewing posts by Pinsider BriPin.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
