Hello to all
And here we go again, the next run of BOP has started.
Here a small video of today’s action.
We are busy milling Bride of Pinbot playfields, They will be finished in a couple of days, then insert gluing.
We are busy looking through F-14, sanding them and getting them ready for clear coating.
If the coat works out well, we will be able to send them out in approx. 3 weeks due to curing time of the clear coat.
This week we will start to sand down the Terminator Playfields, hope we can save the primer work so that we can get them re-printed.
Cabinet decals are in work, will have them in stock by the time that the playfields are ready, actually sooner than that, in approx. 14 days.
It is not possible to send out the decals in the same box as the playfields.
If you need parts like Lane Guides, Star Post of the Bats, we have them on stock and can send them together with the decals.
Playfield Plastic Sets are on Stock.
We are busy doing the final checks on the artwork of Black Rose
and are getting the artwork fitted a bit better to the milling program, re-adjust some factory faults that don’t line up nicely,
It also means that the many layers must be re-adjusted. We don’t use a redraw program for that will just cause many artwork errors.
This and all the artwork is redrawn but hand, hour for hour, days for days.....
Please turn off your speakers or set them low, the video is quite noisy.
Here is the link to Facebook Video.
https://www.facebook.com/buthamburg.de/videos/248529084720730
New updates will follow soon
Regards from Hamburg
Ron, Leon and Peter