BOP 2.0 Owners Club (Members Only)

(Topic ID: 72381)

BOP 2.0 Owners Club (Members Only)


By awarner

5 years ago



Topic Stats

  • 2,482 posts
  • 159 Pinsiders participating
  • Latest reply 33 days ago by mollyspub
  • Topic is favorited by 62 Pinsiders

You

Linked Games

Topic Gallery

There have been 354 images uploaded to this topic. (View topic image gallery).

bop_cabinet_complete_7 (resized).jpg
bop_cabinet_complete_5 (resized).jpg
bop_cabinet_complete_6 (resized).jpg
bop_cabinet_complete_3 (resized).jpg
bop_cabinet_complete_4 (resized).jpg
bop_cabinet_complete_2 (resized).jpg
bop_cabinet_complete_1 (resized).jpg
acronis2 (resized).JPG
P_20181012_180256 (resized).jpg
P_20181012_180247 (resized).jpg
6340d7788c2bb027ebd3c9635a2f8578c2e195a8 (resized).jpg
image (resized).png
IMG_20180817_222456993 (resized).jpg
Screenshot_20180820-091016 (resized).png
Screenshot_20180820-091010 (resized).png
Screenshot_20180820-090526 (resized).png

Topic index (key posts)

5 key posts have been marked in this topic (Show topic index)

There are 2482 posts in this topic. You are on page 36 of 50.
#1751 2 years ago
Quoted from MustangPaul:

I know....a Ray Gun shooter handle, just pill the trigger to shoot the ball..

No, but I like the way you think!

#1752 2 years ago
Quoted from awarner:

I was busy last night:

It was a little scary using a jigsaw to cut the hole bigger. I used a Dremel sanding tool to smooth it out. It worked good.

But you did it and it works. Is there anything you can do about that decal wrinkle around that bolt head?

#1753 2 years ago
Quoted from MustangPaul:

But you did it and it works. Is there anything you can do about that decal wrinkle around that bolt head?

Funny, but that bothered me as well. There is a small nick I got when cutting the hole and it wasn't really a big deal but last night, the playfield glass fell and put another mark in the front decal. I have a spare so after I finish the coin door, I'm going to strip the front decal, fill in the shooter hole, and put on the new decal.

I have too much invested to not do it right.

#1754 2 years ago
Quoted from jsa:

Does the 2.0 kit come with a speaker mounting plate or MDF board that sits between the cabinet and the new speaker? Also, does it reuse the speaker wiring harness or provide a new one?
Is the cabinet speaker a direct swap out for the original?

Quoted from jsa:

...and a follow up to this question: What speakers are shipping with the new kits?

Hey folks, sorry to be a pest on this. Can someone give me some information on the cabinet speaker situation?

#1755 2 years ago

My 2.0 kit came with a speaker that used the original lugs. All of the wiring was replaced as it needs to route to the power amp (provided)

The first kits came with flipper fidelity. Not sure of later batches

#1756 2 years ago

Speakers in batch 3 (CoinTaker) are those used by VPCabs (not sure of brand or model), on recommendation from them.

CoinTaker claim they're better quality, which is hopefully the case, and I'm sure they're also cheaper.

#1757 2 years ago
Quoted from rubberducks:

Speakers in batch 3 (CoinTaker) are those used by VPCabs (not sure of brand or model), on recommendation from them.
CoinTaker claim they're better quality, which is hopefully the case, and I'm sure they're also cheaper.

Thanks for the information. I'm hearing that there is no MDF adapter plate with the kit, which means either I make one or don't care. I'm leaning towards the latter.

#1758 2 years ago

Update on batch 3 orders of BOP 2.0 from Cointaker. Just talked to Melissa, she said they have shipped about 30 of the 50 and are currently shipping about 2-3 per week. So for the rest of us in the bottom 20, it shouldn't be long now till we get to join the party!

#1759 2 years ago

Once the 50 batch 3 kits are delivered, how many Bride of Pinbot 2.0s with there be out there? How big were the earlier runs?

#1760 2 years ago

I don't know where I heard it but I thought first batch was 25 or so

#1761 2 years ago

First and second batch were 25. Hopefully we'll be seeing 1.17 soon!

#1762 2 years ago
Quoted from mollyspub:

First and second batch were 25. Hopefully we'll be seeing 1.17 soon!

Oooh - is there a confirmed software update in the works? Awesome!

#1763 2 years ago
Quoted from Rarehero:

Oooh - is there a confirmed software update in the works? Awesome!

Sure is!...beta testing now. Biggest thing I like is the modes will now continue if interrupted by multiball!

#1764 2 years ago

A couple of additions. Lit Start button and the coin door buttons are back.

IMG_8995 (resized).JPG
IMG_8993 (resized).JPG

#1765 2 years ago
Quoted from awarner:

A couple of additions. Lit Start button and the coin door buttons are back.

Very nice. from your first picture I can see you need the show quality chrome leg bolts. sc93cobra has them for $3 each. I don't know if they are the longer ones but it looks like you could use the longer ones.

#1766 2 years ago

Nice addition of the DanesiDesigns flipper button mod. These are a must on BoP2

#1767 2 years ago

Does anyone know if I need the "Coin door open" switch for the game to work properly? I know it doesn't cut power to the coils like it does in later WPC games. Does it do anything in BOP 2.0? You can see the wires hanging down in my picture above. Should I just connect them together?

#1768 2 years ago

#1769 2 years ago
Quoted from awarner:

A couple of additions. Lit Start button and the coin door buttons are back.

Did you drill the hole bigger for the lit start button or find one that fit the existing hole?

#1770 2 years ago
Quoted from nwpinball:

Did you drill the hole bigger for the lit start button or find one that fit the existing hole?

Believe it or not, the standard lit Start button works great. I got it from PinballLife. Powered by the coin door lights.

#1771 2 years ago

Working on my 2.0 cabinet. Sanded cabinet down to wood. Primed and painted. Clear coated cabinet. Wet sanded cabinet. Applyed 2.0 decals. Did one light coat of clear and let it dry. Applyed 2 more coats of clear and wet sanded in between. Going to apply one more coat.

IMG_6742 (resized).JPG

IMG_6746 (resized).JPG

IMG_6743 (resized).JPG

IMG_6752 (resized).JPG

IMG_6753 (resized).JPG

IMG_6755 (resized).JPG

IMG_6759 (resized).JPG

IMG_6761 (resized).JPG

IMG_6762 (resized).JPG

IMG_6767 (resized).JPG

IMG_6768 (resized).JPG

IMG_6769 (resized).JPG

#1772 2 years ago

Couple more

IMG_6778 (resized).JPG

IMG_6779 (resized).JPG

IMG_6780 (resized).JPG

IMG_6782 (resized).JPG

IMG_6783 (resized).JPG

IMG_6785 (resized).JPG

IMG_6788 (resized).JPG

#1773 2 years ago
Quoted from tatman9999:

Working on my 2.0 cabinet. Sanded cabinet down to wood. Primed and painted. Clear coated cabinet. Wet sanded cabinet. Applyed 2.0 decals. Did one light coat of clear and let it dry. Applyed 2 more coats of clear and wet sanded in between. Going to apply one more coat.

Wow! Looks AWESOME! Congrats on a what will be a beautiful game.

#1774 2 years ago
Quoted from awarner:

Believe it or not, the standard lit Start button works great. I got it from PinballLife. Powered by the coin door lights.

Wait... Correction... This is a Whitewater lower cabinet. I don't know if it'll work on a standard BOP cabinet. My Bad...

#1775 2 years ago

Damn! That. Is. awesome.

#1776 2 years ago

Couple pics of the head.

IMG_6789 (resized).JPG

IMG_6791 (resized).JPG

IMG_6790 (resized).JPG

IMG_6793 (resized).JPG

IMG_6795 (resized).JPG

IMG_6794 (resized).JPG

IMG_6796 (resized).JPG

IMG_6797 (resized).JPG

IMG_6798 (resized).JPG

IMG_6799 (resized).JPG

#1777 2 years ago

Woot! My kit is in the mail. Ordered in early May (with a two week anticipated wait) and 5+ months later, it will (hopefully) be here next week.

#1778 2 years ago

You ALWAYS do a super nice job on your pins tatman.

#1779 2 years ago

I guess I need to call. I haven't heard squat about final payment and I put a down payment in Feb.

#1780 2 years ago
Quoted from lyonsden:

Woot! My kit is in the mail. Ordered in early May (with a two week anticipated wait) and 5+ months later, it will (hopefully) be here next week.

I ordered in May at Pinfest, Allentown. So I should be close as well per my previous post of 2-3 kits are shipping per week.

Quoted from Flake:

I guess I need to call. I haven't heard squat about final payment and I put a down payment in Feb.

Yeah Flake, I would call Melissa at CT for sure because it seems like they are passed you per what they told me (only last 20 kits left to ship) and the fact that Lyonsden is shipped and reserved his in early May.

#1781 2 years ago

I wonder if the squeaky wheel is getting grease. I sent inquiry emails about once a month to get updates. All were answered with "we are shipping in two weeks."

#1782 2 years ago

Yeah!

image (resized).jpg

image (resized).jpg

#1783 2 years ago

Is that actually a batch #2 kit, or one of the CoinTaker (#3) ones?

#1784 2 years ago

I also sent a deposit late Feb. This is the latest I got. As of this moment, no invoice.
Melissa Marquette <melissa@cointaker.com>
To joe meyers
Oct 21 at 9:09 AM
Yes, I’ll be sending you an invoice shortly

Reply Reply to All Forward More

#1785 2 years ago

Followed instructions finished turned on and got this screen do I need a mouse to finish?

image (resized).jpg

image (resized).jpg

#1786 2 years ago

It loaded but won't give me option to play origanal

#1787 2 years ago

Can you get to the test menu with the coin door buttons? I think it's the last option in the test menu.

#1788 2 years ago

I think you need to set the BIOS to Windows 7 instead of Windows 8. Did you do that? You'll need a USB keyboard.

From the Dutch Pinball Board:

Batch 3 (Cointaker) Startup Fix

Postby travisbmartin » October 16th, 2016, 12:03 pm
Hello everyone.

I just got my BoP kit in this weekend from Cointaker and installed it within a couple of hours. However, I had trouble with the PC booting up. It would begin to load the Dutch Pinball logo, but then it would reboot over and over again. But I figured out how to fix it.

Please not that you may have to take the LCD screen off the speaker panel to see what you are doing.

Using the LCD screen and a USB keyboard, turn on the mini PC
Press Delete key until you boot into the PC's BIOS Screen.
Press the Right Arrow key to go to the Chipset Page.
There is a setting here to pick between Windows 7, and Windows 8.1. Mine was preset on Windows 8.1, and I switched it to Windows 7.
Exit BIOS, saving your new settings.

The PC should boot all the way and show you the Program Select screen.

Hope this is helpful for everyone.

#1789 2 years ago

Can get into test menu but can't figure out how to make it play origanal

#1790 2 years ago
Quoted from rubberducks:

Is that actually a batch #2 kit, or one of the CoinTaker (#3) ones?

Cointaker

#1791 2 years ago
Quoted from wierdeer:

Can get into test menu but can't figure out how to make it play origanal

Hold the Start Button. A selection screen will appear.

#1792 2 years ago

Never thought I'd see the day I was quoTed as tech help. I guess the Cubs are going to win after all

#1793 2 years ago

Honestly, once I started playing 2.0, I haven't even tried to go back and play the original. Anyone else feel the same?

#1795 2 years ago
Quoted from wierdeer:

Followed instructions finished turned on and got this screen do I need a mouse to finish?

Note the error message: CPU FAN Fail

You may need to check if a fan header came unplugged from the board.

#1796 2 years ago
Quoted from nwpinball:

Honestly, once I started playing 2.0, I haven't even tried to go back and play the original. Anyone else feel the same?

I mostly play 2.0 cuz it's new and exciting...but I've switched back to OG, cuz it's so different - it really is fun having 2 games in 1. I still like experiencing the music and sounds of the original every so often.

#1797 2 years ago

Seems to be working now... Get options of game on start up now. Haven't tried holding the start button yet.

#1798 2 years ago

Holding start button works

#1799 2 years ago

Wow! So much fun. Got to the video mode and multiball. Hooked up the pinduino kit too... Gotta put the new playfield I got from Peter in still. Need me some new cab decals too. Is there still a free cab decal somewhere?

#1800 2 years ago

253 days, one rebuilt cabinet, too much money on powdercoating, and a new playfield later....
20161103_214331_1024 (resized).jpg

Promoted items from the Pinside Marketplace
From: $ 369.95
Boards
PinSound
$ 150.00
Lighting - Interactive
Professor Pinball
$ 10.00
Cabinet - Sound/Speakers
Gweem's Mods
Trade
Machine - For Trade
Cincinnati, OH
From: $ 20.00
Cabinet - Other
Rock Custom Pinball
$ 200.00
Lighting - Interactive
Professor Pinball
From: $ 16.95
$ 40.00
Playfield - Decals
Metal-Mods
$ 40.00
Lighting - Other
Rock Custom Pinball
6,500 (Firm)
Machine - For Sale
Ladysmith, VA
$ 129.00
Lighting - Led
LED OCD
$ 209.99
Wanted
Machine - Wanted
Boiling Springs, PA
$ 369.00
Cabinet - Decals
Mircoplayfields
Wanted
Machine - Wanted
Los Angeles, CA
$ 50.00
$ 20.00
Electronics
Yorktown Parts and Equip
$ 20.00
Playfield - Decals
DevilsMuse Arcade
$ 9.99
$ 28.00
£ 79.00
Playfield - Other
PinballToys
From: $ 40.00
Cabinet - Other
Rock Custom Pinball
From: $ 29.00
Boards
KAHR.US Circuits
From: $ 40.00
Cabinet - Other
Rock Custom Pinball
Hey modders!
Your shop name here
There are 2482 posts in this topic. You are on page 36 of 50.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside