I suggest you send it to one of the numerous, reputable board repairers on this site.
Unless you have VERY good soldering and electronic repair skills, this IS NOT the board to be practicing on!
You're currently viewing posts by Pinsider pins4u.
Click here to go back to viewing the entire thread.
I suggest you send it to one of the numerous, reputable board repairers on this site.
Unless you have VERY good soldering and electronic repair skills, this IS NOT the board to be practicing on!
Quoted from Catch22:Awesome, thanks so much, Much appreciated everyone for the quick responses! I will use the manual and get these specific parts. I believe when I put the upper flipper in, maybe it caused this. But from the chart someone else listed, that seems wrong? That is the only that I replaced on the entire machine. The machine will boot up and all flippers work, just four switches, have multiple actions now. To me the rest of the board looks perfect So I wanted to switch out these components but was having a hard time finding the specific resistor and capacitor values. This helps alot! I will check the Digi-key, that's a huge help!
Thanks to all that posted.
Keep in mind that, just replacing parts that obviously look cooked, will not necessarily fix your problem. Electronic parts can be destroyed and still look perfectly OK.
Also, after replacing the obviously toast parts, it is very possible that they will go "WHOOSH" up in smoke again.
This is why it really is necessary to have at least a rudimentary understanding of electronics and to know what it is you are replacing and what effects those parts have with the other components they are wired to.
You're currently viewing posts by Pinsider pins4u.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/board-part-id-high-speed-?tu=pins4u and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.