Thanks for posting the rescue of Bally's last released EM pinball.
(Topic ID: 317539)
You're currently viewing posts by Pinsider vec-tor.
Click here to go back to viewing the entire thread.
Quoted from EJS:sand the contact pads in question.
I use a #0000 steel wool for cleaning contact points/print biscuits .
I find that in some cases I have to take needle nose pliers
and slightly squeeze the contacts to the finger blades.
Every now and then one comes across intermittent contact glitches.
--------------------------------------------------------------
Side note:
On high use step up units, I have found it is best to use PEM nuts
to better adhere the 8-32 machine screws with the coil stops to the main bracket.
-------------------------------------------------------------
Thanks, for keeping the progress posted. 
2 weeks later
Quoted from EJS:So, regarding the 3rd player 10,000 advancing while player 1 is up appears to be resolved. Here are my findings:
Pinball Life order is in! Just waiting on drop targets and pop bumper caps from Steve.
[quoted image]
Hard to see in the order but I'm glad I got some new springs. Someone correct me if I'm wrong but I think the shorter spring is incorrect for the flippers? Looks like they belong on pops or something. Seems too short and weak. These are the springs that came installed on the game. The longer springs I had ordered.
[quoted image]
Flipper springs:
Bally SP-200-185 = short spring design for square cut flipper link #P-1973-356.
Items above discontinued.
Superseded by new parts.
Bally SP-200-212 = long spring design for receded counter cut flipper link #P-1973-408.
Promoted items from Pinside Marketplace and Pinside Shops!
You're currently viewing posts by Pinsider vec-tor.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
