I've been reading through countless posts about no sound during game play, but works during the test. My problem is that I have absolutely no sound at all. I've put in a good speech board from my fire power and still get nothing. I know that the sound board is good as I went through and changed all the caps, redid 40 pin connector new speech c5 c6 c7 and still nothing, also replaced all scanbee sockets. I'm kind of at a loss. I know someone will say test power to speaker or you need a new fuse or volume pots...but i am not sure. It starts a game everything works as it was completely dead on arrival, but I did all the typical system 6 stuff. What am I missing or should I be looking for becides fuses and connectors? Because I redid all of those. Or is there a specific connector j9 I should be looking at with absolutely no sound even pushing the test button? I've included a picture of my sound boards in case that helps.
15409309018858608322885732130090 (resized).jpg