Just picked up a BR, and have the classic exploding C11. Did some searching, and a couple of posts mention swapping J-124 and J-132. My J-124 has the two blue wires, and that appears to match the backbox pic on IPDB. But the manual for Black Rose shows the two blue wires should be on J-132. J-132 in my game has a connector with a single Red wire on it, and that's not mentioned anywhere in the game. The pic from IPDB also doesn't appear to show a connector on J-132. Can anyone with a BR confirm the manual is wrong and what should be on J-124 and J-132.

Thanks!

My game

20201216_115045 (resized).jpg

Ha, so I think it's J-106 is plugged into J-132. Would that cause C11 to blow?

Edit: After getting some better schematics, not sure that would cause any issue other than the backbox flashers not working. The single red wire that's supposed to be the 20V on J-106/5 feeds just the flashers on the back panel. By plugging J-106 into J-132, it essentially just put two ground paths to the flashers with no voltage. That shouldn't have popped C11.