Black Rose
Bally, 1992You're currently viewing posts by Pinsider transprtr4u.
Click here to go back to viewing the entire thread.
New member to this club ...drove from Edmonton to Denver to pick up ... great game !
IMG_20190810_0838126 (resized).jpgIMG_20190810_0838195 (resized).jpgIMG_20190810_0838221 (resized).jpgIMG_20190810_0838288 (resized).jpgIMG_20190810_0838352 (resized).jpgIMG_20190810_0838418 (resized).jpgIMG_20190810_0914053 (resized).jpgIMG_20190810_1627314 (resized).jpgIMG_20190810_1627357 (resized).jpgIMG_20190810_1627425 (resized).jpgThis game is a recent addition to my collection, when your ball is in the cannon I'm assuming only the red lights should be on? Is there a way to test this? Will this function work with LED or incadestant bulbs only?
Thanks in advance for any help
Regards
Rob
Quoted from gunstarhero:Works fine with LEDs, my game has been converted over and it works like a champ
What LEDs are you using? Tested the 2 red bulbs in the slings changing them to LED and I instantly blew fuse 109
Quoted from dudah:Comet 2 smd. Perhaps you shorted something putting them in?
Using the 4SMD non ghosting comet bulbs ,machine was off but I will take a quick peek. Do this only come one on when the ball is in the Cannon? Mine are on constantly?
Quoted from BertoDRINK1:Comet Fire LED's
That's a good idea ....
Changed out the posts to what I thought they should be ..went from from all clears to black ,blue and the one orange for the upper right plastic support.
Changed all the rubbers to white and yellow plus red for the slings. Also used black lock nut washers to blend into the color scheme.
IMG_20191017_1132066 (resized).jpgIMG_20191017_1132165 (resized).jpgIMG_20191017_1132304 (resized).jpgIMG_20191017_1132428 (resized).jpgIMG_20191017_1133122 (resized).jpgQuoted from zacaj:Those posts look great. What's the reasoning on the yellow though?
Works well with the colors off the plastics ...
What colors have others gone with...
After going through my game found my DMD was very unsecure due to aged plastic standoffs ... so I'm going to install a Colordmd LCD display. Due to the height of the display will have to arrange the relocation of 2 lights and 1 flasher ...
IMG_20191023_1049502 (resized).jpgIMG_20191023_1049578 (resized).jpg
Quoted from Rdoyle1978:If it’s not too late, Consider a ColorDMD LED display. It’s still full color, still looks great, and keeps closer to the original “dots”. And it’s the same profile as a regular DMD so no obstruction
Have purchased the LED display before and resold it! I find the lack of dots more to my taste, so I use the smooth setting.
Will post the results when done.
Çolordmd. LCD installed... no dots
IMG_20191023_1457138 (resized).jpgIMG_20191023_1456576 (resized).jpgIMG_20191023_1457518 (resized).jpgIMG_20191023_1457230 (resized).jpgIMG_20191023_1457272 (resized).jpgIMG_20191023_1457379 (resized).jpgIMG_20191023_1457456 (resized).jpgIMG_20191023_1457554 (resized).jpgQuoted from Ericpinballfan:Nicely Done, Looks Great!
Thanks Eric....
Quoted from Ericpinballfan:Which One? Set?
Like everyone the main one would be the whirlpool as mine is showing its age , the other would be the red decal on the left ramp going towards the back board
Quoted from v8racefan:Hi collectors,
I've just sold my BR pinball and found today a complete new set of plastics including the backboard plastic. Will upload photo's over the weekend. These are difficult to find. Asking $200usd + postage. International postage is fine. Please message me.
Gouge on the way out
Thanks Rick
greatly appreciated ...ordered !
Have been reaching out as I and I'm sure many more have a great need for the complete decal set for this game!
PLEASE!
in need of a decal set , wondering how many of you also require decals for ramps ect !
please let me know if your in need as Rick may be open to redoing these!
Quoted from Rdoyle1978:This is pretty damn amazing! Way to go Rick. I have always wanted a BR - maybe it’s time
Fun game , you will love it
Quoted from TomN:Just need to level
Mine arrives tomorrow however the one in my game doesn't need replacing ordered one in case of the inevitable!
Quoted from nitrojcrawf:if you lift it up you will see the cut outs in the pivots. You can just pull the whole playfield out by lifting the front of the playfield up and then lift back up and out.
What he said!
Quoted from Rascal_H:Proud of myself moment. Made a new one-way gate from a coat hanger.
great job ....what about the tension spring so the ball wont come out!
Quoted from zacaj:Check that the center shot's gate has a spring
Tension spring for Gate is readily available as well
Quoted from EStroh:let the criticism start
Great Job ... looks great
I had an issue with my AFM were the slam tilt would shut down my game, discovered a switch was stuck in the on position.
Quoted from jheath:How do you pull the play field out to look behind it?
Best to have 2 people , pull the playfield out of cabinet, make sure you have some support to rest the cannon motor on and I used a towel wrapped 2X4 to support the back.
Make sure you check your switches and Bulbs while it's out!
Quoted from jheath:ideas
I generally remove any batteries and install Nvram
Although the games clock doesn't like them, it's better than having to check batteries and worry about damage to my boards
Quoted from jheath:What is the best way to fix the Fire Button? Doesn’t seem to be working unless you pound on it. Can it be replaced with some other mechanism? Also anyone have any ideas on fixing my bar? Looks like a terrible weld job!
Check the gap of the switch... you can also use the flippers as well! If my lockdown bar was showing welds I would replace or have it powder coated black
Quoted from jheath:Where is the best place to get Nvram
If your not familiar with board work , I would let someone with experience install it for you!
Try K's Arcade
Cleaning up the pinball parts and have a brand new lower cannon body shell, also a usable gently used one plus brand new Cliffy cannon protector anyone in need PM me please
Quoted from dudah:operators handbook
Mini version of manual
Not in this club anymore however if I was I would grab this decal set and have them reproduced for the others in need of these ....
https://pinside.com/pinball/forum/topic/black-rose-complete-decal-set#post-6044648
You're currently viewing posts by Pinsider transprtr4u.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/black-rose-club-owners-and-fans-welcome?tu=transprtr4u and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Edmonton, AB
Hackensack, NJ