Cornelius, NC
Anyone have the BLACK ROSE (BALLY) MANUAL WPC SCHEMATIC in pdf? I have the owners manual of course from ipdb but I need the wiring schematics to work out a problem with non working flashers 18 / 20.
(Topic ID: 112697)
Linked Games
Black Rose
Bally, 1992
Topic Gallery
You're currently viewing posts by Pinsider onezero81.
Click here to go back to viewing the entire thread.
1 month later
Quoted from Its_me_aj:Trying to fix some hacked GI plug issues. Can someone take pics of j120 and j121 for me please?
Not sure if this helps but the manual is wrong. Mine had some GI hooked up to high voltage causing ALL sorts of problems. See my thread from a few months ago.
https://pinside.com/pinball/forum/topic/black-rose-flashers-18-20
I just started a quick "MAP" for LED'ing the machine. Wish there was a GI mapping as well. I just OCR'd this out of the manual - page 99. Should help you figure out what you want where and then easily total your order.
https://docs.google.com/spreadsheets/d/17x_gxZKFwqB1kY32adpptEquJ_VOM3-SzTldB8wT5OE/edit?usp=sharing
1 week later
1 week later
Quoted from Greenman74:I did create a Black Rose pinball Facebook group, in case if any of you are interested in reaching out to more people.
https://m.facebook.com/blackrosepinball/
use this if you're on a computer 
https://www.facebook.com/blackrosepinball/
2 weeks later
Quoted from IceMaster:Has anyone had a problem with a ball getting stuck in Davey Jones Locker and not rolling into the cannon? Sometimes all it takes is a little nudge to free it but other times I have to lift the playfield up. I've cleaned the plastic trough and the metal bracket where it drops onto.
I've had this problem. It was actually getting stuck on one of the two switches placed under the playfield in the subway to the cannon. Try adjusting those out a bit.
Quoted from SunMonkeyAZ:I've ordered the led kit from cointakers. The basic one, not super. This is my first led upgrade. Is there anything special I should know ahead of time to be careful of? Or is it just power down, swap them out, power up?
Ensure hard to get to one's are working before you go and piece things back together. Sometimes they don't make proper contact and take some messing with to make a good connection. There's nothing more annoying than putting some part of the playfield back together just to realize you have to do it again. Although, mostly everything can be changed from below the playfield.
3 months later
1 month later
Quoted from Scurvydave:switch F-1 R-flipper EOS
Resets are almost always caps and bridge rectifiers on the power driver board....
BR1,2,3,4 as well as C5,6,7,11 should be replaced to fix the issue I believe.
Find more info here: http://techniek.flipperwinkel.nl/wpc/index2.htm#reset
Quoted from Ericpinballfan:Looking for a cannon body shell. Prefer new, and I'll decal it. So if anyone is hording a spare they would like to sell, I would appreciate it.
Or, same thing Ill take the whole assembly off that shelf for you, or in a box.
Cannon Assmbly Black Rose Body 03-8566, Door 03-8565, Pin 02-4537
Part / Cannon Body 03-8566 Black Rose
I bought one from planetary pinball about 6 months ago. I got the cannon body, door, and top sticker. You should call them to see when they will have them in stock again.
Promoted items from Pinside Marketplace and Pinside Shops!
You're currently viewing posts by Pinsider onezero81.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
