(Topic ID: 112697)

Black Rose Club: owners and fans welcome


By FlippinFantastic

4 years ago



Topic Stats

  • 1,139 posts
  • 145 Pinsiders participating
  • Latest reply 4 days ago by TomN
  • Topic is favorited by 66 Pinsiders

You

Linked Games

Topic Gallery

There have been 330 images uploaded to this topic. (View topic image gallery).

IMG_1578 (resized).JPG
IMG_20191030_1018418 (resized).jpg
IMG_20191030_1019465 (resized).jpg
IMG_20191030_1019378 (resized).jpg
IMG_20191023_1456576 (resized).jpg
IMG_20191023_1457554 (resized).jpg
IMG_20191023_1457272 (resized).jpg
IMG_20191023_1457379 (resized).jpg
IMG_20191023_1457518 (resized).jpg
IMG_20191023_1457456 (resized).jpg
IMG_20191023_1457230 (resized).jpg
IMG_20191023_1457138 (resized).jpg
IMG_20191023_1049502 (resized).jpg
IMG_20191023_1049578 (resized).jpg
IMG_20191020_113412 (resized).jpg
IMG_20191017_1133122 (resized).jpg

You're currently viewing posts by Pinsider bertodrink1.
Click here to go back to viewing the entire thread.

#449 2 years ago
Quoted from Ericpinballfan:

Good work gang. I'll check this and Freeplay40 thread and get a count.

I'd be in on a Whirlpool ramp but I really need a Left plastic ramp mines is broken at the entrance. I posted over on Freeplay40 ramp page that I'm in on those BR ramps .

Also if anyone has a left ramp they would sell I would love to buy it. I have my BR stripped down now giving it a good cleaning and wax, new rings and waiting for LED's from Comet and a couple parts form Marco should be all done this weekend. I LOVE my BR but my poor left ramp is held together with clear tape right now but has pieces missing also at the entrance.

6 months later
#598 2 years ago

Ramps are in the cue from starship fantasy. Middle next year my best guess there. Larry and i talked in May about those. Wire forms will also be available in 2018.
Keep waiting gang.

Which ramps are planned to be made? I need the large left one really. Mines had a piece busted out by the entrance I glued and patched it for now it works but would love a new one.

1 month later
#628 2 years ago

So I finally got tiered of the ball bouncing out of the center Broadside VUK about 75% of the time. It was almost impossible from the Canon. I've seen a few post about having and not having that metal post in the back of the VUK and I knew ours had it. So I finally pulled it out, I have a roll of Velcro I used the Loop side / soft side and wrapped the inside metal also as a cushion and now it works great even from the Canon

20171105_111916 (resized).jpg

8 months later
#753 1 year ago
Quoted from Puffdanny:

What about everyone else?if you don't have diamond plate maybe they did them in runs with slightly different hatdware.

I have the hex post and Do Not have Diamondplate on my playfield. Plastic near it looks broken also but i guess it isn't.

20180710_191921 (resized).jpg
8 months later
#1001 8 months ago

This is great news, email sent to be added to the list.

Alberto

4 months later
#1044 3 months ago
Quoted from OTRChief:

Is the cabinet art on Black Rose painted or is it decals?

There decals

2 weeks later
#1054 3 months ago
Quoted from Buthamburg:

Hi to all
Today Buthamburg received the confirmation to re-produce Black Rose Playfields.
Buthamburg is officially now opening the pre-order list.
Buthamburg has also received confirmation for the following Playfields.
Police Force
Party Zone
Hurricane
In work are the following Playfields
Bride of Pinbot
No Good Goofers
Road Show
Playfields in Shipping
F-14 Tom Cat
Alien Poker
If you wish to be on a pre-order list, then please send an email to peter at buthamburg dot de, with your postal address.
Have a nice day
Regards from Hamburg
Leon & Peter
www.buthamburg.de

Awesome, I should already be on the list I'll send another email to make sure.

1 month later
#1090 60 days ago
Quoted from transprtr4u:

Well switch #62 replaced ... cleaned up behind the backboard ... quite the effort to change a microswitch[quoted image][quoted image][quoted image][quoted image][quoted image]

It is a pain to pull that playfield out.

I put a couple Comet Fire LED's under the back subway gives it cool affect.

1 month later
#1136 4 days ago

Wait wait wait so we're getting new canon assemblies and decals, new ramps from Freeplay40 and a new playfield from Buthamburgh oh man I'm a happy person! next year is going to be great for BR. I will also throw on some new cabinet decals to get rid of those faded ones.

Promoted items from the Pinside Marketplace
From: $ 369.95
Boards
PinSound
$ 9.99
Eproms
Matt's Basement Arcade
$ 87.95
Cabinet - Shooter Rods
Super Skill Shot Shop
From: $ 29.00
Boards
KAHR.US Circuits
From: $ 18.00
Apparel - Men
Pinside Shop
$ 87.95
Cabinet - Shooter Rods
Super Skill Shot Shop
$ 25.00

You're currently viewing posts by Pinsider bertodrink1.
Click here to go back to viewing the entire thread.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside