You're currently viewing posts by Pinsider IceMaster.
Click here to go back to viewing the entire thread.
My Davey Jones Locker Ramp is cracked on the metal piece that goes down onto the playfield. Anyone know of a fix or replacement?
Part # A-14831
I'm looking to upgrade my LEDs to 2SMDs from Cometpinball.com. Has anyone had problems with hot spots on their plastics?
These numbers are pretty rough but should get you close and it doesn't hurt to order a few extra:
Playfield/GI:
50x #555
40x #44
6x #89 Flashers
6x #906 Flashers (the two swords, fire button, and Locker I went with the flexible LEDs because of the angle)
Backbox:
40x #555
8x #906 Flashers
Again, don't quote me on the numbers but that should get you pretty close. I'd buy from Comet and just get the 100 packs for $26 each to get started.
Has anyone had a problem with a ball getting stuck in Davey Jones Locker and not rolling into the cannon? Sometimes all it takes is a little nudge to free it but other times I have to lift the playfield up. I've cleaned the plastic trough and the metal bracket where it drops onto.
Last I heard, 8/16/17, they are in queue at the plastics company. I have a 3d printed cannon door coming from Australia in a few weeks. It's not clear like the original but I would rather have a functioning game for now. He makes the body as well. I won't recommend it until I have it and get it installed.
Got my 3d printed cannon door installed. $35 shipped from Australia in 3 weeks. It's not a perfect fit but at least I have a functioning Black Rose again. I did have to sand the inside of the holes where the shaft goes through and I sanded that curve on the inside that the ball presses against.
Quoted from Ordinal:A combination of playfield wear, and the missing "This playfield is protected by Diamond Plate"
Not all PFs have that. The Black Rose manual says they all are
You're currently viewing posts by Pinsider IceMaster.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/black-rose-club-owners-and-fans-welcome?tu=IceMaster and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.