Going higher on the voltage rating is not an issue, whatsoever.
Going that much higher on the capacitance is not a good idea for most circuits but since in this circuit, it is simply a filter capacitor, you should be just fine.
(Topic ID: 200206)
You're currently viewing posts by Pinsider schwaggs.
Click here to go back to viewing the entire thread.
Good luck! Don't forget to look for cold solder joints on all the header pins. Reflow the solder on all header pins and replace any header pins that look like they overheated.
Quoted from Pinfected:100% working after replacing the cap. Good reminder about the cold solder joints. I have found a surprising number of issued by were solved by reflowing the solder joints on header pins: from display, sound, switch matrix and power issues. Thanks again for your help. The Black Knight rides again!
Very cool! Congrats on the fix!
Promoted items from the Pinside Marketplace
Fridley, MN
You're currently viewing posts by Pinsider schwaggs.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, become a Pinside+ member!
