Quoted from Haymaker:Can anybody help me out with this? I have this one last post to put back on for the sight side of the spinner. The screw won't tighten down. I notice the hole underneath is very different than anywhere else on the playfield. Is there something special that goes in there or is my hole just blown out?
IMG_20150822_112733204.jpg
It's been several years since I did my swap, but I believe that particular post gets a wood screw and it looks like yours is blown out. Drill it through and use a tee nut and a machine screw, or shove some tooth picks in there and see if that holds. It doesn't look like there would be any interference if you drill it through.DSCN1176.JPG