Black Knight
Williams, 1980Hey
My first post here.
I have a problem with the bell in a black knight pinball.
I cant understand how it will work so i suspect that I am missing some parts for it. Ive tried google but I havent found a picture that can really show what is missing.
Perhaps nothing is missing? I dont know.
I hope someone can help me out here, thanks! 
I am getting ready to bring my BK in from storage. I can shoot a pic of it and post later. Yeah, something does not look right on yours.
I have a couple bells from old (80's) bally slot machines that you could probably retrofit for this.
I don't have any pics handy, but I think this may be a good place to start for the parts for the bell assembly. There is a diagram on Marcos website
That unit is missing the clapper...the metal piece that is pulled down by the coil to strike the bell.
Here's a link to a schematic for the bell assembly, you can probably figure out what's missing from this.
http://www.planetarypinball.com/reference/partsmanuals/WMS_Parts_1980/index.html#/108/
Great info from all of you. Im missing a few pieces but I cant find them all on marco, though.
RustyLizard: Thanks for the offer. I'll pm you if I cant find one nearby.
Quoted from Morning-Zombie:I cant understand how it will work so i suspect that I am missing some parts for it.
You are missing the following parts and possibly more:
10-363 spring
01-3971 bell clapper arm plate
01-7044 bell clapper arm
4006-01003-03 x2 screws
The 01-7044 bell clapper arm can be purchased from Marco's:
http://www.marcospecialties.com/pinball-parts/01-7044
And the 01-3971 bell clapper arm plate can be purchased from PBR.
You should be able to pick up the screws and spring you need at a local hardware store.
Quoted from RustyLizard:I have a complete used assembly from a Jungle Lord for $20 plus shipping.
Hey RustyLizard - do you still have this? Don't have the switch and thermistor for Black Knight bell assembly.
Quoted from Gogojohnnyquack:Hey RustyLizard - do you still have this? Don't have the switch and thermistor for Black Knight bell assembly.</blockquote
yes
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/black-knight-bell?hl=rustylizard and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Hudiksvall
Leonardtown, MD