Some questions for my fellow Black Knight 2000 owners. I tried to address an issue I was seeing with slowly hit balls getting stuck between the top edge of the lower-to-upper ramp and post closest to the lighting wheel hole. There was an empty red narrow post and I tried changing it to the following making it even more difficult to nudge it out (tilt disabled). When I first noticed the issue and saw the empty red post I thought it might not have been that way from the factory and some questions came to mind:
1. Is this a legit ball entry path to the Lighting Wheel?
2. What does this area look like factory?
3. Does anybody have a picture of this area of the upper playfield I could use as reference to properly plug up this gap?
4. Would two narrow posts with a single rubber around them work? 2nd post being where that plain screw is in the gap.
Thanks everybody!

lower-to-upper-ramp-post-config (resized).png

tall-narrow-empty-post (resized).png

This what you are looking for?

upper-playfield-right-corner (resized).png

This far under?

B-12599_BallGuide (resized).png

ball-guide (resized).png

If not the only other things are the two screws that fasten the habitrail to the backboard right?

Josh

upper-right-pf-habitrail (resized).png