Hello all, hope someone can help. Having a couple issues with my Black Knight. I can handle a few repairs in this crazy hobby before I call "the guy", actually getting better but want to make sure I am doing things in the correct order.

Left flippers are doa. Just stopped cold in the middle of the game. All wires look good and connected under the playfield, nothing looks fried, action by hand on the coils are smooth, seated and reseated the plug on the board, no lose wires on any of the plugs.

While I was chasing that down I ran the ball around by hand to see if anything else was out, left sling works, but doesn't score. Also the spinner doesn't score.

What I did find is a loose wire on the ball trough switch. Can someone please post a picture of the ball trough switch on a Black Knight? The white/green wire came off and I can't tell exactly were to put it back. The operations pdf doesn't seem to contain a lot of details. Could my other issues be related this? Not really sure if I have 3 issues or 1!

Thanks,
Chris

According to the pic in the back box, both are on the same 20A fuse in F4. Will pull it and check it, but it didn't seem logical.

Pulled and tested all fuses in back box and under the playfield, all good.

Bump

Yep, pulled them out of every socket.

Ok thanks, the white / grn stripe and the white / grn are together. Now I need to figure out my flipper.