Hopkins, MN
Quoted from jcar302:And what the hell is the bulb that faces the relay under the playfield (top right if the playfield is vertical)?
Part of the solenoid expander board wiring.
LTG : )
(Topic ID: 145631)
Linked Games
Black Belt
Bally, 1986
Topic Gallery
You're currently viewing posts by Pinsider ltg.
Click here to go back to viewing the entire thread.
Quoted from jcar302:Where do I look now?
Grab meter. Check continuity of wires from switch to board in the head.
Quoted from jcar302:Also, the right flipper seems a little weak
Remove the coil stop, coil, check for sharp edge or mushroomed plunger, worn coil sleeve. Might need rebuilding or cleaning.
LTG : )
Disclaimer : That is an old picture of me on the right. I can post here.
55118_1568248098500_6709240_o (resized).jpgQuoted from jcar302:As for the switch, on the J4 connector of the board, I have continuity on the white/brown (At least i think it's brown) wire all the way to the switch, the black wires traced to 2 other switches that function and have continuity.
On the white/brown, I still have continuity on the header pin if I check with the connector pulled out a little and check to the pin itself.
If you hook your meter to the wires on the connector at the board and close the switch, does it register ? If not a board issue.
LTG : )
Quoted from jcar302:Nope, no continuity.
That sounds like a break from the connector to the switch then.
LTG : )
Promoted items from Pinside Marketplace and Pinside Shops!
You're currently viewing posts by Pinsider ltg.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
