I have one coil that does not fire in test mode or game play (left most pop bumper). When the coil is grounded it does fire. Where do I start to look? The interconnect board below the playfield? The interconnect in the back box?
I have one coil that does not fire in test mode or game play (left most pop bumper). When the coil is grounded it does fire. Where do I start to look? The interconnect board below the playfield? The interconnect in the back box?
The interconnect below the playfield is for power to the upper playfield so that would be a great place to start. Could be a burned up trace on that lower interconnect board. I'd start Checking it for continuity to make sure everything is connected.
Quoted from the96stang:Where do I start to look?
Do a switch test and see if the skirt switch shows up on the display.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/bk2k-pop-bumper-coil-doesnt-fire?hl=darcangeloel and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.