You're currently viewing posts by Pinsider JOESCHALL.
Click here to go back to viewing the entire thread.
In the pix above, the top picture (single-stack EOS) is the left flipper and the bottom picture (double-stack EOS) is the right one. The right one has a double stack EOS so that it operates the right flipper in the upper deck.
Again, the EOS left side is the top picture and the EOS right side is the bottom picture. Hope these help.
Leaving my computer for the day now, but let me know if I can help further. As to our exact wire color matching for every lug, there I can't be sure how to advise you, because my flippers were both rebuilt years ago with entirely new assemblies, and the red and black wires were part of those assemblies, so don't let those colors throw you off.
Good luck!
Sorry, but between my differently colored wires and your miswired switches, I can't be sure where the two wires you mentioned go. Don't want to give bad advice. Hopefully someone else can jump in and clarify.
You're currently viewing posts by Pinsider JOESCHALL.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/bk2000-flipper-rebuild-question?tu=JOESCHALL and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.