Hey Guys, I noticed my new/first BK wouldn’t taunt in the right outlane. I took a look under the playfield and noticed the green/red wires to the right outlane switch were missing and in its place was a yellow wire connecting to the green/red wire on the nearby right inside rollover.

I also noticed left spinner (which works) only has one green/red wire to it (that didn’t come from the right outer rollover lane like the diagram says).

Can I just connect a wire from the left outlane switch to the right outlane switch (like the switch diagram says)? Do I need to connect a wire to the left spinner as well?

I also tried cleaning the switch contacts with a piece of paper but that didn’t help

Thanks I’m advance!!

6EFF709B-499D-4D1E-9B3E-E38AE9C45A0E (resized).png

C6574C82-977B-4705-B460-6B8EA3E839CE (resized).jpeg

Thanks LTG! Yes I checked the right inside rollover and it works. I’ll check the solder tomorrow and report back.