Big Valley
Bally, 1970You're currently viewing posts by Pinsider rolf_martin_062.
Click here to go back to viewing the entire thread.
Hi Max
"green" is to let "Initial-Current" to flow to the Credit-Relay - it pulls-in and
"orange is established Self-Hold-Current of the Credit-Relay".
The pulling Credit-Relay "encircled-red Switch" allows Initial-Current to flow "red" to Coil on Coin-Relay" it pulls-in and
"blue" is the Self-Hold-Circuitry of the Coin-Relay.
When You use the "First Coin Chute": "Straight upwards another form of "Initial-Current to Coin-Relay. Greetings Rolf
Hi Max
great - You may have fixed it permanent. IF (if, if) the fault comes back: May want to do a "not beautyful but working" fix using two Jumper-Wires (my green and my brown lines) connecting both sides (same color to same color) ? "Switch on Coin-Relay": It is the Self-Hold-Switch - a short wire runs from one side of the Coil on Coin-Relay to switch mounted on Coin-Relay. Greetings Rolf
You're currently viewing posts by Pinsider rolf_martin_062.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/big-valley-bally-1970-start-up-issues?tu=rolf_martin_062 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Aarau