(Topic ID: 141723)

Big Guns kickers wiring problem

By grandy

8 years ago



Topic Stats

  • 3 posts
  • 2 Pinsiders participating
  • Latest reply 8 years ago by grandy
  • No one calls this topic a favorite

You

Linked Games

Topic Gallery

View topic image gallery

IMG_20151016_201931187.jpg

#1 8 years ago

I've been slowly restoring a Big Guns over the past year, and it's finally at the finish line. When i purchased it, 3 of the 4 slingshot switches were not there. I've replaced them all but I've done something wrong because both left and right are shorted - when i do the switch test they are constantly on. Everything else on the machine is working and i just want to play a game on this thing, so any help is much appreciate!

Can somebody post pictures or a diagram or anything that will help me get these wired correctly?

Thanks in advance.

#2 8 years ago

IMG_20151016_201931187.jpgIMG_20151016_201931187.jpg

Ok so the white purple on the left side and non banded diode go on the floating switch tab. The banded end goes to one leaf. The greens with stripe go on other leaf. And there is a simple jumper going to the other switch from the leaf ends.

Other side the same but looks to be a white blue for the right side. Once again that wire and non banded side are tied to floating contact. Banded end goes to switch leaf. And the greens go to other switch leaf.

#3 8 years ago

THANK YOU!!

Promoted items from the Pinside Marketplace
2,600
Machine - For Sale
Davenport, FL
From: $ 33.00
Gameroom - Decorations
Rocket City Pinball
Decorations
From: $ 1.25
Playfield - Other
Rocket City Pinball
Other
$ 2.50
Lighting - Led
Pinballrom
Led
$ 54.99
Cabinet - Shooter Rods
Lighted Pinball Mods
Shooter rods
From: $ 1.00
Playfield - Other
Rocket City Pinball
Other

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


This page was printed from https://pinside.com/pinball/forum/topic/big-guns-kickers-wiring-problem and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.