Hey guys, new to the club. Got the game all working except for the dam locks for multi-ball both sides of the playfield. All switches work in test: Cannon switches, lock switches, and the through switches (3). Light is lit on both sides to lock the balls. Diode's are all checking as good. No errors on startup. Play first ball and lock it, it gets moved it over to the cannon and anther ball is released into the shooter lane. 2 seconds later the cannon fires out the ball creating a 2 ball multi-ball. This happens on both sides of the playfield never being about to keep 1 ball locked. Could this be a chip issue?

Tried that as well, even made sure the ball did not register that switch. Either way did not matter.

I know, even tried not having it closed.

I got this dam thing fixed. Took the whole catapult assembly apart and cleaned each one. Lots of old grease on the pivot points. Also replaced both switches on the assembly. The switches making contact was so close to either triggering the switch or not. I adjusted the switchs slightly up towards the playfield. Both locks now work!

On a side note, what angle degree you guys have yours set to?

Where can I find a new translite? Mine is pretty faded.

NOS from Mayfair, beautiful.

20211120_171807 (resized).jpg