Have a similar issue to one mentioned above. Led flashers came in the game and didn’t notice any issues with them at first but wasn’t looking. I wanted to put incandescent in so I did but started blowing flasher bulbs right away. Put led flashers is and a couple are not working and some of them pulse when the flipper buttons are pressed. My flasher board doesn’t look like others I’ve seen. Also, the bagatelle was working initially but now the switches aren’t registering when the ball rolls over them and it reshoots it another time or two and looks like it just gives a random award. The 3x insert on the field acts correctly during attract mode but stays lit during play, diode tests correct though. Any guidance would be appreciated

9BF73C24-960D-424C-9ED8-6343E38B6E1A (resized).jpeg

Thanks for quick response, I will read through that to see if I can find more info to help me. Ideally I’d like to just put all incandescent back in but I am blowing them in as soon as they go on in test mode. The leds are staying in right now because they aren’t blowing.

I agree, I like incandescent more and want to put them back in but they are blowing, that’s what I’m trying to fix

Thanks for verifying that

Upon further review I noticed one of the connectors on the auxiliary flasher board was one pin off, fixed and bagatelle works as it should. A few flashers still not working but could be because it hasn’t been modified to have all led flashers. Still blowing incandescent flasher bulbs at certain spots, I know the popper and right cannon blow the first time they light up. The coils are all working as they should

They are 89 for sure. I have all flashers working with leds in except the bb queen/bot left- q25. The right bottom flasher goes on instead during test mode. Other not working bottom right and bb man q32. Other thing, when I have 2 led flashers installed in the center bb under the bagatelle, the bagatelle doesn’t register line switches but when I take one led flasher out, it works as it should…..

Update on my flasher issues previously mentioned:after realizing a connector being one plug off, a few burnt out flashers and the flashers not working working in a few sockets for some reason, I have resolved the issue. Some flashers still flash when flippers are presses but that wasn’t my biggest issue, thanks to dumbass, I can resolve that later if I want but that doesn’t bother me all that much while playing, thanks again guys