Dear Lloyd
Our resident pinball guru Lloyd Olsen answers Pinside readers questions!
Our resident pinball guru Lloyd Olsen answers Pinside readers questions!
Thursday October 6th 2016
Hi Lloyd,
I have an issue with recently purchased Williams “Big Guns’ machine. The ball wont eject into the side lane, I can hear the relay clicking in the back board but the solenoids wont engage.
Issue two is that I keep blowing fuses on the right side flippers.
Rupert
Hi Rupert
The relay you hear clicking - check that is is soldered on good, even reflow the solder points. And be sure the leaf blade switches inside are working and clean.
Check the flippers that they are wired right, and EOS leaf blade switches open soon into the flipper stroke and don't stay closed.
Vid1900 wrote a flipper rebuild guide that could really help you :
https://pinside.com/pinball/forum/topic/vids-guide-to-upgradingrebuilding-flippers
LTG : )
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/big-guns-aint-so-big and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.