I've got power, and went over the wiring.
Rebuilt rectifier board.
Everything cycles and tests as it should, but I am overlooking something.
Anyone have any ideas?
You're currently viewing posts by Pinsider L_satan.
Click here to go back to viewing the entire thread.
I've got power, and went over the wiring.
Rebuilt rectifier board.
Everything cycles and tests as it should, but I am overlooking something.
Anyone have any ideas?
It blows the moment I hit the flipper button. Coil doesn't even energize; or rather, draw the plunger into the coil.
When I tap the button, quickly, nothing happens, and the fuse does not blow. Looks like it gets hot, but doesn't blow. If I hold the button in for almost a second, the fuse goes.
I looked down the threads of Pinside, and did find wiring examples for the flippers posted. A little hard to see, but mine wiring looks correct. EOS looks good as well.
Thanks, Scott.
I believe something else is at issue.
I need to test the diodes, they could be goofy.
I've got decent movement of everything--I actually rebuilt all the flippers, replacing one coil. Even polished the mounting brackets.
Just can't think of the the issue.
Latest:
The left flipper button now re-starts the machine.
Flipper solenoids, wiring, diodes, all correct.
decent movement on the plungers by hand.
Multi-meter tested.
Any ideas on the short?
why this is happening?
Thank you Scott and Brenna.
Z.
Alright;
I did something a little fancy.
I Added a plug section on to the rectifier board I rebuilt.
I think this was smart.
Soldering the transformer to the rectifier sucks.
This will make repairs easier.
If any of you regulars know this is dumb; please let me know.
I even swapped the S driver with a new S driver; same issue.
Game re-boots, when I hold the left flipper button in for half a second.
Tapping it, all the lights dim drastically.
Guh.
Now I've goofed it up even more somehow.
No solenoid action, save the right flipper on game start-up.
You're currently viewing posts by Pinsider L_satan.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/big-game-left-flipper-blows-5a-fuse?tu=L_satan and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.