Hi Chuckwurt !

PM sent for a spinner

Lionel

I can help spinner big game.jpg

Sorry , i don't sell the spinner . I need it !!! I bought one on Pinside to chuckwurt some week ago to fix my machine.

This is the scan to help ...as said adamgacek "at painting unless someone has a scan of the spinner art"

This is the scan of the first unique spinner i had before buying the Chuckwurt's one.
I'm sure you can do a new one with this scan

Here's the both during installation

P1030221.jpg

I'm not ready.

I have fixed the power supply
P1030176.JPG

P1030179.JPG

but all the wiring harness in the backbox is cut

Congrats for your score
I need your advice .

The wiring harness is cut between backbox and display panel.
I would like to install connectors like this.

connector.JPG

I looked at Marco , but i'm not sure about ALL the parts to order.

Then i have to fix connectors , coils , and install an new ALTEK board, and i will be ready to test the gameplay

Thanks for your info.

Picture
tofix.JPG

What connector to use ,

Interested in this new board

Have some issues on the light panel on Nineball too..

Hi,
Looking for a picture of the connector J3 (big one) of the Power supply, to check the COLORS of each pin . Mine is broken ( 3 parts ) , and some pins were disconnected ..
I need to rebuild it totally

Of course i have the schematic, but i preffer to be secure..before power-up.

Sounds easy to shoot , through the door

Thanks
Lionel

Thank you so much Cottonm4 !